Tools & DIY
VEVOR 1.2KW Electric Hydraulic Rebar Bender: specs and who it suits
A portable 110V electric hydraulic rebar bender rated for 4 to 22 mm bars in about 4 to 5 seconds. What the motor, relief valve and limits mean on site.
Home / Product overviews / Tools & DIY / Power & Hand Tools
Rebar Cutters & Benders
12 product overviews: what each product is, the features that matter and what to check before you buy.
Tools & DIY
VEVOR 30-Inch Box and Pan Brake: features, specs and who it suits
A 30-inch benchtop sheet metal brake that bends 18-gauge mild steel from 0 to 135 degrees, with a built-in clamping bar. What the specs mean.
Tools & DIY
VEVOR 36-Inch Box and Pan Sheet Metal Brake: features and who it suits
The VEVOR 36-inch box and pan brake bends sheet metal up to 36 inches wide, to angles up to 135°, in 20-gauge steel and 14-gauge aluminum.
Tools & DIY
VEVOR 48-Inch Box and Pan Brake: capacity, angles and who it suits
A 48-inch Q235 steel sheet metal brake that bends 20-gauge mild steel and 14-gauge aluminum at angles to 135 degrees. What the specs mean for a workshop.
Tools & DIY
VEVOR 3/8-inch to 1-inch Manual Pipe Bender with 7 Dies: specs and uses
A heavy manual tube bender for round pipe from 3/8 to 1 inch (10-25 mm), with seven dies and a long handle. What the specs mean and what to check.
Tools & DIY
VEVOR 3/8 to 1-Inch Manual Pipe Bender: specs and who it suits
A VEVOR manual tube bender with seven dies for 3/8 to 1 inch round pipe, bends up to 180° in copper, aluminium, brass and stainless steel. What the specs mean.
Tools & DIY
VEVOR Ratcheting Pipe Tube Bender with 7 Dies: features and who it suits
A hand-operated ratcheting tube bender for soft copper and aluminium pipe from 1/4 to 7/8 inch, with seven dies, a pipe cutter and a carry case. What the specs mean.
Tools & DIY
VEVOR Three-Station Sheet Metal Brake: features, specs and who it suits
A portable three-station sheet metal brake from VEVOR that bends 30 to 19 gauge steel up to 90°, with an adjustable bending height of 16 to 145 mm.
Tools & DIY
VEVOR TR60A Manual Tube Roller Bender with 6 Dies: specs and who it suits
A manual crank tube and pipe roller bender for round and square tube and flat bar, up to 1-1/2 inch, with six dies and 360-degree bending. What to check.
Tools & DIY
VEVOR UM30 Manual Pipe and Tube Bender with 14 Dies: specs and uses
A floor-standing manual bender with 14 dies for flat bar, pipe and tube in steel, copper and aluminium, bending up to 200 degrees. What the specs cover.
Tools & DIY
VEVOR W-1.0X610A 24-Inch Box and Pan Brake: features, specs and uses
A 24-inch sheet metal box and pan brake with ten modular fingers and a 0-135 degree bending range. What the specs mean and what to check before you buy.
Tools & DIY
VEVOR YP-9 Manual Metal Bender: capacity, dies and who it suits
A manual bender for solid round and square bar with seven round dies from 1 to 3 inches and a 44-inch handle. What the specs mean and what to check.