xTool D1 Pro 20W Laser Engraver with Rotary Kit: specs and uses

The xTool D1 Pro is a desktop diode laser engraver and cutter with a 20W laser output. This kit (model MXD-K001-004) adds the xTool RA2 Pro, a 4-in-1 rotary attachment, so it can engrave curved objects such as tumblers, wine glasses and rings as well as flat sheets. It is aimed at hobbyists, makers and small businesses making personalised items.

Power, speed and what it can cut

The listing gives the laser output as 20W and the machine power as 120W. xTool says that is enough to cut 10mm basswood or 8mm black acrylic in a single pass, and that the maximum processing speed is 400mm/s. These are the brand's figures, and results depend on the material, its moisture and density, and your settings.

A diode laser uses a blue-light semiconductor. Diode lasers typically work well on wood, leather, paper, dark acrylic and many coated materials. Transparent materials usually let the beam pass through, and bare metals are generally marked only with the help of coatings or marking sprays. The listing mentions work on metal, glass and fabric, so check xTool's material guide for what each setting needs.

The 4-in-1 rotary attachment

The RA2 Pro supports four modes: roller, chuck, sphere and ring. In general:

• A roller rotates cylindrical items such as tumblers, bottles and bats.
• A chuck grips items with a stem or base, such as wine glasses.
• A sphere mode holds round objects.
• A ring mode supports jewellery.

Rotary engraving turns the object while the laser stays still, which lets the design wrap around a curved surface.

Frame, safety and construction

xTool lists upgraded X and Y axis limit switches that help locate the laser position and stop it hitting the edge of the frame, plus high-precision wear-resistant slide rails, four-way hard limiters and an auxiliary blowing nozzle that clears smoke from the cut. The listing also mentions a protective hood for the eyes and a flame sensor that detects and alarms in an emergency. It quotes up to 10,000 hours of laser lifespan.

Lasers need care whatever the design. Always follow the manual, wear laser-rated eye protection if it advises, never leave the machine running unattended, and work in a ventilated space because burning materials produces smoke and fumes.

Software and connections

The machine works with LightBurn and with xTool Creative Space (XCS), xTool's own platform, which the listing says has over 1,000 projects and 500 elements. XCS runs on Windows and MacOS. You can connect by Wi-Fi, USB or TF card.

Size and assembly

The dimensions are listed as 38.8 x 15.2 x 5.9 inches (about 98.5 x 38.6 x 15 cm), so allow a stable table with room for the moving gantry. xTool describes the machine as easy to assemble.

Who it suits

It suits makers who want to personalise gifts, create wooden organisers, patches and cards, or start a small craft business, especially if they want to engrave drinkware or jewellery with a rotary.

What to check before you buy

• Workspace: you need space for the machine and a way to vent smoke outdoors.
• Materials: confirm that the materials you plan to use are suitable for a diode laser; some plastics release harmful fumes and shouldn't be cut.
• Rotary fit: check the size range of items the roller and chuck can hold.
• Computer: confirm your computer runs XCS or LightBurn.
• Safety gear: have suitable eye protection and a fire extinguisher nearby.
• Local rules: check any regulations for laser equipment where you live.

The short version

• 20W diode laser engraver and cutter with 120W machine power.
• Rated by xTool to cut 10mm basswood or 8mm black acrylic in one pass, at up to 400mm/s.
• 4-in-1 RA2 Pro rotary for rollers, chucks, spheres and rings.
• Limit switches, eye-protecting hood and flame sensor.
• Works with LightBurn and XCS over Wi-Fi, USB or TF card.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.