VEVOR NTS-A15B Retractable Air Hose Reel: 50 ft, 300 PSI, specs explained

The VEVOR NTS-A15B is a spring-driven reel that stores a 50-foot compressed-air hose and pulls it out only when needed. It is made for garages and workshops where a hose left on the floor gets in the way, kinks or becomes something to trip over.

What comes with the reel

The reel includes 50 feet (about 15 m) of 3/8-inch rubber air hose and a 5-foot lead-in hose that links the reel to your compressor line. The hose ends in a 1/4-inch NPT brass fitting, the thread size common on air tools and compressor outlets in North America. VEVOR says the hose passed leak-proof testing.

How the auto rewind works

A spring inside the reel pulls the hose back in once it is released. According to VEVOR, a gentle pull starts the retraction. Three features control how far it goes:

• A ratchet lock that holds the hose at the length you pick.
• An adjustable stopper that sets where the hose stops.
• Non-snag rollers that guide the hose in and out and reduce wear on its surface.

Retracting reels typically work best if you guide the hose back by hand instead of letting the end whip in.

Pressure and temperature limits

The rubber hose is specified for up to 300 PSI, well above what most workshop compressors deliver, which is commonly in the region of 90 to 175 PSI. The hose is listed for use from 23°F to 113°F (about -5°C to 45°C), so it is aimed at heated or temperate garages rather than extreme cold. A spring guard and a rubber sleeve protect the hose where it bends at the fittings, which is where wear usually starts.

Dual-arm steel frame and mounting

The reel is a heavy steel assembly with arms on both sides of the drum, which VEVOR says keeps the hose steady as it extends and retracts. The reel can be fixed to a ceiling, wall or workbench. A ceiling mount keeps the hose overhead and out of the way, while a wall mount is easier to reach and service. Whichever you choose, the fixings need to be strong enough for the 27.5 lb (about 12.5 kg) reel plus the pull of the spring, so follow the instructions on anchors and spacing.

The reel measures 15.9 x 7.1 x 16.5 inches (about 40 x 18 x 42 cm).

Typical uses

VEVOR lists tyre inflation, spray painting and everyday pneumatic tasks in the workshop. A 50-foot reach covers a single-car garage with room to spare, though some pressure is lost over long hoses, particularly at high flow.

What to check before you buy

• Mounting surface: confirm that your ceiling joist, wall stud or bench can carry the weight and the spring tension.
• Reach: measure from the mounting point to the farthest place you will work, and allow for the reel's own height.
• Compressor connection: check your compressor's outlet thread and fittings against the 1/4-inch NPT connections.
• Operating temperature: compare the 23°F to 113°F range with your workshop.
• Air tools: make sure the 3/8-inch hose supplies enough flow for the tools you run.
• Upkeep: check the manual for guidance on lubrication, inspecting the hose and replacing parts.
• Safety: use the reel within its stated pressure limit and read the instructions before pressurising.

The short version

• A retractable air hose reel from VEVOR, model NTS-A15B.
• 50 ft of 3/8-inch rubber hose rated to 300 PSI, plus a 5 ft lead-in.
• Auto rewind with a ratchet lock, adjustable stopper and non-snag rollers.
• Dual-arm steel frame for ceiling, wall or bench mounting.
• 1/4-inch NPT brass fitting; about 27.5 lb.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.