Home / Tools & DIY · Product overviews / Power & Hand Tools / Power Tool Parts & Accessories · More from VEVOR
VEVOR HS6805 Portable Rolling Table Saw Stand: specs and who it suits
A foldable rolling table saw stand with 8-inch wheels, a 350 lb load capacity and an adjustable mounting range. What the specs mean and what to measure first.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR HS6805 is a foldable, wheeled stand for a portable table saw. It lifts the saw to a workable height, folds flat for storage and rolls to wherever the job is. VEVOR says it fits most table saw brands, thanks to an adjustable mounting range.
What a stand adds
Portable table saws are usually used on a workbench or the floor, which isn't always the right height or stable. A stand gives the saw a firm base at a standing height. A folding, wheeled design means the whole setup can be moved across a site or stowed in a corner or a vehicle.
Load capacity and frame
The stand is built from high-strength steel with a robust frame and is listed for up to 350 lb (about 159 kg). Check the weight of your saw, and of long boards being cut, against that figure. VEVOR says the frame is intended to remain stable during demanding woodworking.
Adjustable fit
The mounting range goes from 17.44 x 8.87 inches to 22.64 x 19.1 inches (about 44 x 22.5 cm up to 57.5 x 48.5 cm). VEVOR advises measuring the footprint of your saw first. Check the mounting holes or base of the saw against the stand's brackets, as the listing doesn't state a specific hole pattern.
Wheels and moving it
Two 8-inch anti-slip rubber wheels let you tilt the stand and roll it, reducing the effort of carrying a heavy saw between spots. Larger wheels typically cope better with gravel and uneven ground than small ones.
Folding and storage
A release lever lets you fold or unfold the stand by pressing it. VEVOR says the quick-fold design saves storage space. Folded and unfolded sizes should be checked in the manual. The listing gives 43.3 x 29.9 x 24.4 inches (110 x 76 x 62 cm), and the stand weighs 16.5 lb (about 7.5 kg).
Setup
An installation guide is included, and VEVOR says you can be ready to cut once all parts are tightened. Tighten fasteners as directed and check them periodically, as folding stands can loosen with use.
Who it suits
Contractors, carpenters and home woodworkers who use a portable table saw and want a stand that folds away. It also suits people who move between a garage and a job site.
What to check before you buy
- Saw footprint: measure the base of your saw against the 17.44 x 8.87 to 22.64 x 19.1 inch range.
- Weight: compare your saw plus workpieces with the 350 lb limit.
- Mounting: confirm how your saw bolts or clamps to the stand.
- Ground: check that the wheels and legs suit your work surface.
- Locking: make sure the stand is fully open and locked before cutting, as the manual describes.
- Storage: check the folded size against your storage space.
The short version
- A foldable, rolling table saw stand, model HS6805.
- 350 lb load capacity on a steel frame.
- Adjustable mounting range from 17.44 x 8.87 to 22.64 x 19.1 inches.
- Two 8-inch anti-slip rubber wheels and a release lever for folding.
- 16.5 lb with an installation guide included.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
