VEVOR KD-Y5255 Jewelry Rolling Mill: features, specs and who it suits

The VEVOR KD-Y5255 is a hand-operated rolling mill for jewelry makers. It squeezes soft metal between two hardened steel rollers to make it thinner, so a thick ingot or piece of wire can become sheet, square wire or elliptical wire. It is a bench tool for people who make rings, bangles and bracelets and want to prepare their own stock.

What a rolling mill does

A rolling mill passes metal between two parallel rollers set slightly closer together than the metal is thick. Each pass thins and lengthens the piece. Jewelers use this to make sheet for pendants and settings, to flatten wire, and to reduce a piece to an even thickness before cutting or soldering. Because the work is done cold, most metals harden as they are rolled and typically need to be annealed (heated to soften them) between passes.

Roller size and spacing

The rollers on this model are 57 mm (2.24 inches) wide. VEVOR says the gap between them can be adjusted from 0 to 5.5 mm by turning the T-bar, and that the gears are CNC-machined for accuracy. A fine adjustment screw like this matters because small steps in the gap let you reduce thickness gradually rather than forcing a big squeeze in one pass, which is gentler on both the metal and the machine.

Three tools in one

The listing calls it a 3-in-1 machine. It handles flat sheet, square wire and elliptical wire, so one mill covers several kinds of stock. Sheet is rolled on the flat section of the rollers, while wire shapes are formed in grooves cut into the rollers. Check the manual to see how the grooves are laid out and what sizes they produce.

Gear ratio and construction

The gear ratio is 1:2. In a hand-cranked mill, a gearing arrangement like this typically trades extra turns of the handle for easier effort on thicker or harder pieces. VEVOR says the rollers are 45# steel, chosen for wear resistance and hardness, which helps give a smooth, mirror-like finish on the metal. The body is heat-treated and coated in rust-resistant oil.

The mill weighs 45.2 lb (about 20.5 kg) and measures 18.9 x 5.1 x 13.4 inches (roughly 48 x 13 x 34 cm). That weight is useful on a bench, since a mill that moves while you crank is hard to control, but it should be bolted or clamped to something sturdy.

Metals it is made for

VEVOR lists gold, K gold, pure silver, 925 silver, copper and aluminium, along with other highly malleable metals. Harder alloys, or metals that work-harden quickly, put more strain on any mill and are usually rolled in smaller steps. The brand positions it for both professionals and DIY makers.

Who it suits

• Hobbyists and small studios who want to make their own sheet and wire rather than buying it in fixed sizes.
• Makers working on rings, bangles and bracelets, where consistent thickness matters.
• Anyone who wants a manual machine with no motor or power supply.

What to check before you buy

• Bench and space: the mill is heavy, so confirm you have a solid bench and room to turn the handle fully.
• Your metals: check the manual for the metals and maximum thickness it recommends.
• Roller grooves: confirm the wire sizes and shapes you need are available.
• Annealing gear: a torch and pickle setup is usually needed for softening metal between passes.
• Upkeep: rollers need to be kept clean and lightly oiled, and metal debris kept off their surface to avoid marks.
• What's in the box: check the manual for the handle and any tools supplied.

The short version

• A manual 57 mm (2.24 in) jewelry rolling mill, model KD-Y5255.
• Roller gap adjustable from 0 to 5.5 mm with a T-bar.
• Makes sheet, square wire and elliptical wire; 1:2 gear ratio.
• 45# steel rollers and a rust-resistant coated body.
• Weighs 45.2 lb (about 20.5 kg), so plan a sturdy mounting.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.