VEVOR JBSF-320 12-Inch Solar Gable Fan: features, specs and uses

The VEVOR JBSF-320 is a 12-inch fan that mounts to a gable wall to push hot, stale air out of an attic, garage or workshop. Heat builds up quickly under a roof in summer, and moving it out can make the space more comfortable and ease the load on the rest of the house. This page explains what the numbers mean and what to check first.

What 1300 CFM means

CFM stands for cubic feet per minute, a measure of how much air the fan can move. VEVOR rates this model at 1300 CFM and says it covers up to 1850 sq ft. Figures like this are normally taken in free air, so real-world airflow is lower when the fan has to pull air through vents or work against a restriction. Attic ventilation also needs fresh air coming in, typically through soffit or other intake vents, otherwise the fan struggles.

The adjustable thermostat

The fan has a built-in adjustable thermostat. It switches on and off based on the surrounding temperature, so it runs when the space is hot and rests when it is not. VEVOR presents this as an energy-saving feature. The practical benefit is that you don't have to remember to switch it on.

Solar power

The listing describes the model as a solar-powered attic fan. Solar fans typically rely on a panel in sunlight, which suits the hottest part of the day, when attics most need venting. Check the listing and manual for how the panel is supplied and connected, since the product text focuses on the fan unit itself.

Mesh and materials

The fan is made from high-strength PP (polypropylene) plastic, which VEVOR says is durable for long-term use. A protective outer mesh is meant to keep birds, leaves and debris out. Plastic housings do not rust, though sun and weather affect all outdoor plastics over the years.

Size and mounting

The unit measures 13.4 x 13.4 x 2.8 inches (about 34 x 34 x 7 cm) and weighs 10.9 lb (about 5 kg). It includes a 12-inch mounting bracket and VEVOR says it can be mounted to a wall without professional tools. You will need a gable opening of a suitable size, so measure before cutting anything. For wiring, roofing or structural work, follow the manual and local building codes.

Where it suits

VEVOR names attics, roofs, garages and workshops. It fits a building with a gable wall and a way for replacement air to enter. It is less suited to a hip roof with no gable end.

What to check before you buy

• Opening size: confirm the gable opening and wall type match the 12-inch bracket.
• Intake air: make sure the space has enough intake vents to replace what the fan exhausts.
• Sun exposure: a solar fan needs reasonable sun on its panel through the day.
• Space size: compare your floor area with the stated 1850 sq ft coverage.
• Upkeep: plan to clear the mesh of dust and debris from time to time.
• Codes: check local rules and the manual for installation requirements.

The short version

• VEVOR model JBSF-320, a 12-inch gable-mount ventilation fan.
• Rated at 1300 CFM for areas up to 1850 sq ft.
• Adjustable thermostat switches the fan on and off automatically.
• Polypropylene housing with an outer mesh against birds and debris.
• About 13.4 x 13.4 x 2.8 inches and 10.9 lb, with a mounting bracket included.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.