Home / Tools & DIY · Product overviews / Building Supplies · More from VEVOR
VEVOR HXGATE-004 Adjustable Chain Link Fence Gate, 70 x 72 in
An adjustable galvanized steel chain link gate that fits openings from 24 to 72 inches, with latch and hinges included. Specs and fit explained.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR HXGATE-004 is a ready-made chain link gate with a galvanized steel frame. It is built for the opening in a fence at a yard, garden, farm or driveway, and it adjusts in width and height so that it can be fitted to openings of different sizes. Posts are not included.
Frame and chain link panel
The frame is galvanized steel, which VEVOR says gives durability and rust resistance in all weather. Galvanizing is a zinc coating, and it is the standard way to slow corrosion on outdoor steel. The infill is tightly woven chain link. VEVOR says it keeps out small animals and intruders and provides privacy and security for a property, though chain link is open mesh, so it does not block sight lines.
How the size adjustment works
The gate measures about 70 inches wide by 72 inches high (roughly 178 x 183 cm), and VEVOR lists a depth of 1.38 inches. According to the brand, it fits openings from 24 to 72 inches and can be adjusted in both width and height. This matters because gate openings are rarely standard. Measure the clear gap between your posts and allow for the hinge and latch hardware.
Post compatibility
The listing says the gate is suitable for 40/42 mm posts, which is about 1.6 inches in outer diameter. Posts are sold separately. If your existing posts are a different diameter or shape, the hinges and latch may not fit them as supplied.
What is in the box
VEVOR lists the gate frame, a latch, hinges and cable ties, along with installation accessories and instructions. It says no professional tools are required. As a general rule, gates sag if posts are not set plumb and firmly, so the quality of the posts and footings matters as much as the gate itself.
Where it is used
VEVOR describes it for yards, gardens and driveways, and the listing mentions farm use as well. Typical uses include a pedestrian entrance, a pen or paddock access, or a gap in a garden fence.
Who it suits
It suits owners who already have chain link fencing or posts of the right diameter and need a gate for a gap of between 24 and 72 inches. It is less suited to anyone who wants a solid privacy fence or a wide vehicle gate.
What to check before you buy
- Opening width and height: measure between the posts and compare with the 24 to 72 inch range.
- Post diameter: confirm that your posts match the 40/42 mm size.
- Posts and footings: buy and set posts separately, and follow the manual and any local rules.
- Swing direction and clearance: check that the gate can open fully without hitting a slope or obstacle.
- Local rules: pool, livestock and boundary fences may be covered by codes or bylaws.
- Upkeep: lubricate hinges and inspect the latch periodically.
The short version
- An adjustable chain link gate, model HXGATE-004, about 70 x 72 inches.
- Galvanized steel frame with tightly woven chain link infill.
- Fits openings from 24 to 72 inches and 40/42 mm posts.
- Latch, hinges and cable ties included; posts not included.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
