VEVOR 1 Ton Electric Chain Hoist, 120V: features, specs and who it suits

The VEVOR 1 ton electric chain hoist is an overhead lifting machine that raises and lowers heavy loads on a chain, powered from a standard 120V outlet. VEVOR positions it for garages, workshops, hotels and homes, where moving an engine, a mower or a heavy object by hand would be slow and awkward.

What the capacity figure means

VEVOR rates the hoist at 2,200 lb (1 ton) with a G100 chain, lifting at 10 ft per minute (3 m per minute) up to a maximum height of 10 ft (3 m). G100 is a chain grade: it indicates a higher-strength alloy chain than the older G80 grade. A rated capacity is the maximum working load, not a target. Anything you lift must be well below it once you count slings, hooks and other gear.

At 10 ft per minute, a full-height lift takes roughly a minute. This is a steady pace, designed for controlled movement rather than speed.

Motor and cooling

The motor is listed as copper-wound, rated at 1400W, with a large radiator fan to keep it cool. Hoists are generally rated for intermittent duty, meaning they are meant to lift in short bursts with rest between, not run constantly. The manual should state the duty cycle, and respecting it protects the motor.

At 1400W on a 120V supply, the hoist draws a substantial current, around 12 amps. Plan the circuit, and the length and gauge of any extension cord, with that in mind.

Brake and emergency stop

VEVOR lists an emergency stop switch and an electromagnetic brake system intended to prevent abnormal slipping. In general, an electromagnetic brake holds the load when the power is off or the button is released. These features support safe handling, but they do not replace good lifting practice: never stand under a raised load, and follow the manual.

Installing it

According to VEVOR, the hoist can be hung from the ceiling with metal strips or solid wood strips. Whatever the support is, it must carry far more than the hoist's stated capacity, including the weight of the hoist itself, which is 72 lb (about 32.7 kg). Overhead mounting points in a home or garage often need an assessment by a qualified person, such as a structural engineer or experienced installer. Follow local codes and the manual.

Wired remote

A handle switch is connected to the unit by a 10 ft (3 m) cable, so the operator can stand to one side at a distance. A longer cable gives more flexibility in where to stand while the load moves.

Where it fits

VEVOR suggests uses such as boat repair, automotive work, mowers, golf carts, engines, boulders, trees and home projects, and it mentions hunters hanging game. The hoist measures about 16.9 x 10.1 x 24.1 inches (43 x 26 x 61 cm).

Note that hoists are for lifting loads vertically. Some are not designed for lifting people, and the listing does not say otherwise, so never use one for that purpose.

What to check before you buy

• Real weights: confirm the heaviest load you will lift, with a margin.
• Mounting point: check the strength of the beam or ceiling before you hang 72 lb plus the load.
• Lift height: 10 ft may not reach your needs for taller spaces or deep pits.
• Power: check the outlet, circuit and extension cord for a 1400W load.
• Accessories: confirm hooks, slings and shackles are rated for the load.
• Upkeep: check the manual for chain lubrication and inspection routines.

The short version

• A 120V single-phase electric chain hoist rated at 2,200 lb (1 ton).
• G100 chain, 10 ft of lift at 10 ft per minute.
• 1400W copper motor with a cooling fan, electromagnetic brake and emergency stop.
• 10 ft wired remote handle; weighs 72 lb.
• Needs a properly rated overhead support and careful lifting practice.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.