monTEK TM1007W-XLF Fixed TV Wall Mount: features, specs and who it suits

The monTEK TM1007W-XLF is a fixed TV wall mount built for very large screens. It holds a TV flat against the wall, close to the surface, and is rated for sets from 37 to 150 inches and up to 375 lb. It suits anyone mounting an oversized display where a standard bracket would run out of capacity or width.

What "fixed" means for your setup

A fixed mount doesn't tilt, swivel or extend. The TV hangs flat on the wall plate, and monTEK says it sits just 1.25 inches (about 3.2 cm) from the wall. The result is a clean, flush look, and fixed mounts are typically the simplest and sturdiest type because there are no moving joints.

The trade-off is flexibility. You can't angle the screen to cut glare, and reaching the ports means working in the narrow gap behind the set. It's worth connecting and testing your cables before the TV goes up, and thinking about viewing height and angle first. Fixed mounts suit rooms where you sit straight on to the screen.

Reading the size, weight and VESA numbers

The listing gives three numbers that need to match your TV. The first is screen size: 37 to 150 inches, for flat and curved models. The second is weight: up to 375 lb. monTEK says the mount passed 4× load testing, which is a brand claim about its test margin, not a reason to go near the limit. The third is the VESA pattern, the spacing of the four mounting holes on the back of the TV. This mount covers patterns from 300×200 mm to 1200×800 mm, which is wide enough for very large displays whose holes sit far apart.

Check your TV's manual or the back panel for the VESA size and weight, including any stand or soundbar you plan to attach.

Walls and stud spacing

The mount is designed for three wood studs at 16", 18" or 24" spacing, and monTEK says it also works on concrete or brick. It is not suitable for drywall-only installation. A large wall plate that spans three studs spreads the load across the wall structure, which matters for a heavy screen.

Adjustable centring lets you slide the TV left or right on the plate, so the screen can sit in the middle of the wall even when the studs aren't. A stud finder is the usual way to locate them before you drill.

Installation and cable management

The mount uses a pull-string locking mechanism for hanging and removing the TV. Step-by-step instructions are included, and cable management straps keep wires tidy. At 10.2 lb for the mount alone, the hardware is manageable, but a TV in this size range is large and heavy, so plan for more than one person to lift it. Follow the manual, and check local building codes if you're unsure about your wall.

Who it suits

It suits home theatres, big living rooms and bedrooms where the screen is the main feature and sits at a fixed viewing position. It also suits people with a 75 to 100 inch or larger television who need a mount that is rated well above the usual range.

What to check before you buy

• TV size and weight: confirm both against the 150-inch and 375 lb limits, with any accessories added.
• VESA pattern: measure the hole spacing on your TV and compare it with 300×200 to 1200×800 mm.
• Wall type: you need wood studs at 16", 18" or 24" centres, or concrete or brick. Drywall alone isn't suitable.
• Cable outlet position: the TV sits close to the wall, so check where your power and cable outlets are.
• Viewing position: a fixed mount can't be angled, so choose the height and spot carefully.
• Help on the day: have a second person for lifting.

The short version

• A fixed, low-profile mount for 37 to 150 inch flat and curved TVs.
• Rated by monTEK for up to 375 lb and tested to 4× load.
• Sits 1.25 inches from the wall.
• Fits VESA patterns from 300×200 to 1200×800 mm.
• For three wood studs (16", 18", 24"), concrete or brick; not for drywall alone.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.