Creality Falcon2 22W Laser Engraver: features, specs and who it suits

The Creality Falcon2 22W (model LE-22W-CV50) is a desktop laser engraver and cutter for hobby and small-workshop projects. It marks and cuts materials such as wood, acrylic and leather, and can mark metal. It arrives assembled, with air assist built in, so most of the work is connecting it and choosing a design.

What 22W of laser power means

Creality gives the optical output as 22,000 mW, and says it can cut 15 mm wood and 10 mm black acrylic in a single pass, at engraving speeds up to 25,000 mm/min. The listing also refers to a 120W machine figure, which is the input power rather than the laser output. In general, higher laser power means thicker cuts or faster work, but results depend on material, focus and settings, so test pieces are standard practice.

For metal, Creality explains that the heat changes the surface, producing marks and colours rather than cutting through.

A fine laser spot

The laser spot measures 0.06 x 0.08 mm. Creality says its spot compression technology narrows engraved lines for finer detail and improves cutting capacity. A smaller spot generally allows sharper text and images. The brand lists metal, stainless steel, ceramics and glass among the materials it can engrave.

Air assist

A stream of air at the cutting point helps clear smoke and debris and reduces flare-ups when cutting wood. On the Falcon2 the air assist is integrated: you connect the pipe and adjust the flow with a knob. Extra riser stands are included to raise the machine for taller workpieces.

Safety features

The listing describes triple monitoring systems and five protections. If a flame is detected, or the machine tilts, flips or is dropped while working, it stops and sounds a buzzer. The laser is Class 4, so read the manual first, use appropriate eye protection and follow local regulations. Don't leave it running unattended.

Software and offline use

Insert a TF card and the machine can run jobs without a computer connected, and the position can be adjusted precisely on the machine. Creality lists compatibility with LaserGRBL (free), LightBurn and its own Falcon Design Space (free).

Who it suits

It suits crafters making signs, coasters, leather goods and engraved gifts, and small makers who want more power than low-power diode lasers offer. Larger or production-scale work may call for a bigger machine.

What to check before you buy

• Workspace: the unit measures about 19 x 18 x 7 inches and weighs 17.4 lb; you need a stable bench.
• Ventilation: laser cutting produces smoke and fumes, so plan for extraction or open airflow.
• Materials: check that what you plan to cut is suitable for a diode laser.
• Software: decide between the free options and LightBurn.
• Support: Creality lists lifetime technical support and an 18-month warranty; read the terms.
• Eye protection: use laser-rated goggles as the manual advises.

The short version

• A 22W (22,000 mW) Class 4 laser engraver and cutter, assembled out of the box.
• Cuts 15 mm wood and 10 mm black acrylic in one pass, according to Creality.
• 0.06 x 0.08 mm spot, integrated air assist, up to 25,000 mm/min.
• Flame, tilt and drop detection stop the machine.
• Offline use from a TF card; works with LaserGRBL, LightBurn and Falcon Design Space.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.