Creality Falcon2 12W Laser Engraver: features, specs and who it suits

The Creality Falcon2 12W is a desktop laser engraver and cutter for hobby and craft work. It is supplied assembled, includes an air assist pump and extra riser stands, and can mark or cut materials such as wood, acrylic and leather. Here is what its main specs mean.

12W power and cutting claims

The laser is rated at 12,000 mW of output, and Creality classes it as Class 4. In general, higher laser power means thicker materials can be cut in fewer passes. Creality says it can cut through 10 mm wood and 5 mm black acrylic in a single pass, with engraving speeds up to 25,000 mm/min. Those are the brand's figures, and real results depend on the material, its moisture, focus and settings.

A small, compressed laser spot

The spot measures 0.06 x 0.08 mm, and Creality says spot compression technology narrows engraved lines for finer detail and improves cutting. A smaller spot concentrates the same power in a smaller area, which typically gives crisper detail. Creality states the machine can also engrave materials such as metal, stainless steel, ceramics and glass; for these, check the manual for what the laser can mark.

Integrated air assist

An air assist pump is included, and you connect its pipe and adjust it with a knob. Air assist blows smoke and debris away from the cut, which typically gives cleaner edges and keeps the lens cleaner. The extra riser stands raise the machine to help with taller objects or other work scenarios.

Safety systems

Creality lists triple monitoring systems and five safety protections. When a flame is detected, or the engraver is tilted, flipped or dropped during work, the machine stops and a buzzer sounds. A Class 4 laser can cause eye and skin injury and starts fires, so follow the manual, use appropriate eye protection and never leave it running unattended.

Offline use and software

You can insert a TF card and engrave without a computer connected, and position the job on the machine. It works with LaserGRBL, LightBurn and Creality's Falcon Design Space software.

Size, weight and support

The machine weighs 17.4 lb, and the description gives a working area of 17 x 16 inches. Creality states lifetime technical support, an 18-month warranty and 24-hour customer service, and there's an installation video in the listing.

Who it suits

It suits hobbyists, makers and small craft projects such as signs, gifts, wood and leather goods, who want enough power to cut as well as engrave.

What to check before you buy

• Workspace: it needs a stable bench, with room around it for the pump and cables.
• Ventilation: laser work produces smoke and fumes, so plan for extraction or an enclosure.
• Eye protection: use eye protection rated for the laser's wavelength.
• Materials: only use materials the manual lists as safe to cut or engrave.
• Software: check whether you prefer the Creality software or another program such as LightBurn.
• Fire safety: keep an extinguisher nearby and supervise every job.

The short version

• A 12W (12,000 mW) Class 4 diode laser engraver and cutter, 17.4 lb.
• Brand-stated single-pass cuts of 10 mm wood and 5 mm black acrylic.
• 0.06 x 0.08 mm spot, speeds up to 25,000 mm/min.
• Air assist pump and riser stands included.
• Flame and tilt safety stops; TF card offline use; LaserGRBL, LightBurn and Falcon Design Space compatible.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.