bloiq.

Guides to buying well and travelling well

Home / Home & Kitchen · Product overviews / Vacuums & Floor Care / Robotic Vacuums · More from Yeedi

Yeedi M14 Plus (DEX68) Robot Vacuum and Mop: features and who it suits

A robot vacuum with an OZMO roller mop, 18,000Pa suction and an OMNI Station that washes the roller with hot water and empties the bin. The specs explained.

This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.

The Yeedi M14 Plus (model DEX68) is a robot vacuum and mop that comes with an OMNI Station. The station handles the dull parts: washing and drying the mop roller, emptying the dustbin and supplying water. It is aimed at households that want floors vacuumed and mopped with little hands-on upkeep.

A roller mop instead of pads

Many robot mops use a flat pad or a pair of spinning discs. The M14 Plus uses a cylindrical roller instead. Yeedi says its OZMO roller turns at up to 200 RPM while clean water continuously refreshes it, and that the concentrated pressure helps with dried-on stains, sticky spills and footprints. Because the roller is washed as it works, it should carry less dirt back onto the floor than a pad that gets dirtier as it goes.

What 18,000Pa suction means

Pascals measure suction pressure. Yeedi rates the M14 Plus at up to 18,000Pa. A higher number can help lift fine dust and debris from carpet fibres, but real-world results also depend on brush design, airflow and sealing. The brand says the suction adjusts automatically across hardwood, tile, rugs and carpet.

Anti-tangle brushes

Long hair and pet fur are the usual cause of brush upkeep. Yeedi's ZeroTangle 3.0 system pairs an anti-tangle main brush with a redesigned side brush, intended to guide hair toward the suction path instead of letting it wrap. Even with anti-tangle designs, an occasional check of the brushes is typical.

Re-mopping and edge cleaning

Two software-led features target the finish. AI Instant Re-Mop 2.0 is described as identifying areas that need more cleaning and mopping them again. TruEdge 2.0 lets the roller extend closer to walls, corners, cabinets and baseboards, which are places mops commonly miss.

The OMNI Station

After each cycle the station washes the roller with hot water of up to 167°F (75°C), then dries it with hot air of up to 145°F (63°C). Drying matters, because a damp roller left sitting can develop odours. The station also empties the dustbin automatically, with Yeedi quoting dust collection capacity of up to 75 days. Actual intervals depend on how much dirt your floors produce.

Wi-Fi note

The listing notes that the robot works only with 2.4GHz Wi-Fi networks and does not support 5GHz. Many routers offer both bands, but check yours before setup.

Size and who it suits

The listing gives the dimensions as 13.3 x 18.1 x 19.7 inches, so you need floor and height clearance for the station. It suits homes with mixed hard floors and rugs, pet owners, and people who want mopping automated.

What to check before you buy

  • Floor types: look at how the robot treats carpets and rugs when the mop is in use, per the manual.
  • Space for the station: it needs a spot near an outlet with room around it.
  • Wi-Fi band: confirm 2.4GHz is available.
  • Thresholds and clearance: check door sills, furniture height and cables.
  • Upkeep: plan for water, cleaning solution, roller and filter replacement as the manual describes.

The short version

  • A robot vacuum and roller mop with an OMNI Station.
  • OZMO roller at up to 200 RPM; up to 18,000Pa suction.
  • ZeroTangle 3.0 brushes, AI Instant Re-Mop 2.0 and TruEdge 2.0 edge cleaning.
  • Hot-water roller washing, hot-air drying and automatic bin emptying.
  • Works with 2.4GHz Wi-Fi only.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.

Keep reading