Dreame D10 Plus Robot Vacuum and Mop with Self-Emptying Base: specs

The Dreame D10 Plus is a robot vacuum and mop that comes with a self-emptying base. It maps your home with a laser sensor, vacuums, mops with a small water tank, and then returns to the base, which pulls the dirt out into a bag. The aim is to reduce how often you have to empty the dust bin. Here is what the main specs mean.

Suction and cleaning modes

Dreame lists a maximum suction of 4000 Pa with four suction modes. Pascals measure suction pressure, and a higher figure typically means a stronger pull on dust and crumbs, though brush design, airflow and floor type also matter. The robot collects into a 400 mL dust box. Lower modes are generally quieter and stretch the battery, while the top mode suits carpets and heavier dirt.

Battery and runtime

A 5,200 mAh battery delivers up to 180 minutes of continuous cleaning, according to Dreame. Runtime depends on the suction mode and the floor, so the longest figures are typically reached on lower settings. Dreame says this is enough to cover large homes in a single run.

LiDAR navigation

LiDAR works by spinning a laser to measure distances to walls and furniture, then building a map. Dreame says the robot uses it for fast, accurate maps and systematic path planning that avoids missed spots and repeated passes. Laser mapping generally works in low light, because it does not rely on a camera.

Mopping with adjustable water

The mop uses a 150 mL water tank with three water volume settings. Lower volumes suit sealed wood and laminate, where less moisture is better. Higher volumes suit tougher floors such as tile. Small tanks cover a limited area per fill, and mopping is typically a light-duty task compared with scrubbing by hand.

The self-emptying base

The base station empties the dust box into a 2.5 L dust bag. Dreame says this provides up to 45 days of hands-free cleaning and that the base avoids clogging. When the bag is full, you replace it. Bags are a recurring part to consider, and they are specific to the model, so check availability.

App and voice control

The app lets you choose cleaning modes, select rooms, set virtual walls and place no-go zones, and schedule cleaning. The robot needs a 2.4 GHz Wi-Fi network. Alexa voice control is supported for starting, pausing and stopping.

Size

The listing gives 18.0 x 14.0 x 16.0 inches (about 46 x 36 x 41 cm), which most likely includes the base. Check the dimensions of the robot itself against furniture clearance.

Who it suits

It suits busy households that want regular floor cleaning with minimal effort, especially with mixed hard floors and low-pile carpet. It is less suited to homes with many cables or small toys on the floor, as these should be tidied first.

What to check before you buy

• Wi-Fi: the app requires a 2.4 GHz connection.
• Floors: check whether your carpets are low or high pile, and whether you need mopping on all floors.
• Clearance: measure under furniture and check where the base can sit, with space around it.
• Parts: check the availability of bags, filters and brushes through the brand.
• Upkeep: brushes and sensors still need occasional cleaning, as the manual describes.
• Water tank: 150 mL is small, so think about the area you want mopped.

The short version

• A robot vacuum and mop with 4000 Pa maximum suction and four suction modes.
• LiDAR navigation, app room selection, virtual walls and no-go zones.
• A 5,200 mAh battery for up to 180 minutes, per Dreame.
• A self-emptying base with a 2.5 L bag, rated for up to 45 days.
• A 150 mL water tank with three water volume levels; 2.4 GHz Wi-Fi and Alexa support.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.