Home / Auto · Product overviews / Lights, Bulbs & Indicators / Light Bars · More from Auxbeam
Auxbeam P4 Series 4-Inch 90W Amber Round LED Spot Pod: features and specs
Auxbeam's P4 Series is a 4-inch round 90W amber LED spot pod rated at 9,000 lumens, with an IP68 housing and 9-32V operation. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The Auxbeam P4 Series is a 4-inch round LED pod that emits an amber spot beam. It is meant for off-road vehicles, utility rigs and boats that need a compact auxiliary light. Here is what the listed specs mean and what to confirm before fitting one.
Output and colour
Auxbeam says each light uses nine 5W 3535 LED chips, giving 90W in total and 9,000 lumens of output. Lumens measure total emitted light, and the brand's figure is best used to compare lights from the same maker. The beam is amber, rated at 3200K. A colour temperature that low gives a warm, yellow light. Many drivers choose amber for fog, rain, dust and snow, because it tends to scatter less than cool white light in those conditions.
Spot beam
The pod is described as a spot light, which puts light into a narrow, focused beam instead of spreading it wide. A spot is good for reach, since the light travels further ahead. For wider coverage, people usually pair spot pods with flood pods or a light bar. Auxbeam also says the beam pattern is designed to perform in foggy conditions.
EMC design
The listing mentions an upgraded EMC (electromagnetic compatibility) design, with faster on and off response. The idea is to keep the light from producing electromagnetic interference that could affect car audio or the vehicle's computer. This matters most on vehicles with a radio, sensors or a lot of electronics.
Housing and weather resistance
The housing is die-cast aluminium with advanced sealing, and the protection class is IP68. That generally means dust-tight and designed to withstand immersion, within the limits the manufacturer sets. The listing suggests uses on off-road vehicles, motorcycles, ATVs, UTVs, SUVs, construction and farm vehicles, trucks, buses, pickups and boats.
Voltage and installation
The operating voltage is 9-32V, which covers 12V and 24V systems. Auxbeam calls the pod plug and play and says a mounting instruction is included. Its listing suggests mounting on a roof rack, bull bar, headache rack or running bar. The listed weight is 4.6 lb (about 2.1 kg), most likely for the packaged set.
Who it suits
An amber spot pod suits drivers who want extra reach in poor visibility, or a warm-coloured work light. It is less of a fit for anyone who needs wide, even area lighting from a single light.
What to check before you buy
- Quantity: confirm how many pods the listing includes before you plan your layout.
- Mounting spot: measure for a 4-inch round body plus its bracket.
- Wiring: check the harness, fuse and relay against the 90W per-light figure and follow the manual.
- Beam type: decide whether a spot beam is what you want, or whether you also need flood pods.
- Local rules: colour and use of auxiliary lighting on public roads vary by region, so check before driving with them on.
The short version
- A 4-inch round amber LED pod rated at 90W and 9,000 lumens, per Auxbeam.
- Nine 5W chips, a 3200K amber spot beam and an EMC design.
- IP68 die-cast aluminium housing.
- Works from 9-32V, so it suits 12V and 24V systems.
- Check the mounting space, wiring and local lighting rules before installing.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
