Auxbeam 22-Inch 180W LED Light Bar with 5D Pro Lens: features and specs

The Auxbeam 22-inch LED light bar is a 180W auxiliary light for off-road driving, work sites and night use. It is built around a 5D Pro lens and is sold as a kit with a wiring harness and brackets. Here is what its listed specs mean and what to check before mounting it.

What 22,000 lumens means

Auxbeam rates the bar at 22,000 lumens. Lumens measure the total light a source emits, but not how far it reaches or where it goes. Two bars with the same lumen figure can look very different on the trail, because the optics decide how that light is spread. Brand lumen figures are also usually measured at the chip or fixture, so treat them as a way to compare output within a brand's own range rather than a promise of what you will see on the road.

Lens and chips

The listing describes a 5D Pro optic lens and high-intensity KW3 chips, intended to push a beam further. Optic lenses shape light from each LED into a controlled pattern, rather than letting it scatter. Auxbeam adds that both ends of the bar carry spot-flood P8 LEDs that widen the lit area compared with an ordinary bar. In general, a pattern that mixes a long-reaching centre with wider sides is useful for trails, where you need distance ahead and visibility to the edges.

Housing and weather resistance

The bar carries an IP68 protection class, according to Auxbeam, with a die-cast aluminium housing and sealing built for harsh weather. IP68 generally means the unit is dust-tight and designed to withstand immersion, within the limits the manufacturer sets. The listing also mentions built-in EMC (electromagnetic compatibility) design, meant to reduce radio interference and flicker.

Mounting options

The mounting screws are adjustable, so the angle can be set to suit. Auxbeam lists bumper mounting and side mounting, and says the bar can go on a roof rack, bull bar, headache rack or running bar. It describes uses as an off-road light, fog light, driving light, work light, roof lamp or night light.

What is in the box

• One 22-inch 5D Pro LED light bar
• One plug-and-play wiring harness kit
• Two sets of mounting brackets
• One installation manual and some installation accessories

Auxbeam says this removes the need to buy a separate harness or plug. The listed weight is 6.1 lb (about 2.8 kg).

Support

Auxbeam lists a one-year replacement offer and 24-hour after-sales service. Check the exact terms with the seller before relying on them.

Who it suits

A 22-inch bar fits drivers who want a single long light on a roof rack, bumper or bull bar, and those who need work lighting for a trailer, farm vehicle or utility rig. It is a flexible choice for people who want one main light, instead of several small pods.

What to check before you buy

• Length: measure the space on your rack, bumper or bar. 22 inches is about 56 cm, plus brackets.
• Electrical capacity: check wiring, fuse and relay against the bar's 180W draw, and follow the manual.
• Road rules: many places limit or ban the use of auxiliary light bars on public roads. Check local rules.
• Wind noise and clearance: a bar on a roof can add noise, so check the mounting position.
• Upkeep: wipe the lens clean, and recheck the mounting bolts now and then, as the manual suggests.

The short version

• A 22-inch, 180W LED light bar rated at 22,000 lumens by Auxbeam.
• 5D Pro optic lens, KW3 chips and spot-flood end LEDs for a wide, far-reaching pattern.
• IP68 die-cast aluminium housing with EMC design.
• Comes with a plug-and-play harness, two sets of brackets and a manual.
• Check mounting space, wiring capacity and local lighting rules first.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.