VEVOR TF23 Hydraulic Lift Table Cart: features, specs and who it suits

The VEVOR TF23 is a manual hydraulic lift table on four wheels. A single scissor mechanism raises a flat platform so a load can be moved at a comfortable working height, which cuts down on bending and awkward lifting in workshops, warehouses and garages.

How a manual scissor lift works

A scissor lift raises its platform by closing the base of an X-shaped linkage. On this model, a foot pedal pumps hydraulic fluid, which pushes the scissor mechanism upward. VEVOR says the integrated pump gives efficient lifting without oil leakage. To lower the platform, you operate a hydraulic release lever, which lets the fluid return gradually so you control the descent. Because it needs no mains power, it can be used anywhere there is floor space.

Key specifications

The listing gives these figures:

• Capacity: 500 lb (230 kg).
• Height range: 9 to 28.5 inches (220 to 720 mm).
• Platform: 28 x 18 inches (700 x 450 mm).
• Material: Q235 cold-rolled steel with a powder-coated finish. VEVOR describes the coating as rust-resistant.
• Weight: 99.2 lb (45 kg) net.

The load limit covers the load plus anything else on the platform, so keep within it. A load placed evenly and near the centre is generally more stable than one at the edge.

Safety features

VEVOR lists a limiter that prevents over-lifting, and a maintenance or overload protection bar, which is designed to be used when servicing the mechanism. A rubber non-slip pad on the platform helps keep items from sliding. The manual covers correct use of each feature, and loads should only be moved at a low height.

Wheels and moving the cart

Four PU (polyurethane) swivel wheels let the cart rotate in any direction, and a locking mechanism holds it in place when you do not want it to roll. PU wheels are typically quiet and gentler on floors than hard plastic or metal ones. VEVOR describes them as wear-resistant and corrosion-resistant. Lock the wheels before loading or lifting.

Who it suits

It suits workshops, garages, small warehouses and maintenance teams that need to raise machinery parts, boxes, tools or equipment to bench height, or to move them between work areas. It is a utility cart rather than a vehicle lift, and it is not designed to carry people.

What to check before you buy

• Load and platform size: make sure the heaviest item, and its footprint, fit 500 lb and 28 x 18 inches.
• Height needs: compare the 9 to 28.5 inch range with the height of your bench or shelf.
• Floor: a flat, firm surface suits wheels and a lifted load best.
• Weight of the cart: at about 45 kg, it is heavy to carry up stairs.
• Securing the load: check how you will keep tall or loose items steady.
• Upkeep: check the manual on hydraulic maintenance and inspection, and follow its safety instructions.

The short version

• A manual single-scissor hydraulic lift table cart in orange.
• 500 lb capacity; platform lifts from 9 to 28.5 inches.
• Foot pedal pump and a release lever for lowering.
• Limiter, overload protection bar and non-slip pad.
• Four locking PU swivel wheels; about 45 kg.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.