VEVOR SBC200 60-Gallon Sandblasting Cabinet: features, specs and fit

The VEVOR SBC200 is a 60-gallon sandblasting cabinet on a stand. It lets you clean, strip and finish small and medium parts inside an enclosed box, so the abrasive and the dust stay mostly contained. It suits garage and workshop jobs such as removing rust, paint and oxidation from metal parts.

How a blast cabinet works

A cabinet-style sandblaster is connected to compressed air. You put the part inside, close the door, and reach in through built-in gloves to aim a blasting gun at the surface. The abrasive is propelled by the air, strips the surface, then falls back to the cabinet's base to be reused. Compared with open blasting, a cabinet reduces mess and wasted media.

What 5 CFM at 40-120 PSI means

VEVOR says the cabinet operates at 5 cfm at 40-120 PSI. These figures describe the air supply. PSI is the pressure and CFM is the volume of air per minute. Your compressor needs to deliver at least that air volume at the pressure you run, or blasting will slow and become uneven. Check the compressor's rated CFM at the working pressure, not just its maximum PSI.

Capacity and media

The "60 gallon" refers to the cabinet's interior volume, and VEVOR says it can accommodate up to 203.4 pounds of blasting media. The gun works with a variety of media, including glass beads, silicon sand and aluminum oxide. Different media suit different jobs: glass beads typically give a smoother, satin finish, while harder abrasives such as aluminum oxide cut faster. Media needs to be dry and clean to flow properly.

Visibility and lighting

A large acrylic window and bright LED lighting give a clear view of the work. Since the blast clouds the window over time, VEVOR includes four lens protectors, so you can replace a worn one rather than buy extras.

Construction and sealing

The cabinet is made from heavy-duty cold-rolled steel with a powder-coated finish for corrosion and rust resistance. A pre-installed sealing strip, plus sealant material, is meant to reduce dust leakage and keep the workspace cleaner. A dust-collection or extraction setup is a common addition to cabinets like this, so check what the manual says.

What's included

The kit includes the blasting gun and four ceramic nozzles. Ceramic nozzles resist wear, but nozzles are consumables, and an enlarged opening reduces blasting performance. Assembly is required, and VEVOR says it provides installation guidance and support.

Size and weight

Overall dimensions are about 37.1 x 22.9 x 54.5 inches (roughly 94 x 58 x 138 cm), and it weighs 78.7 lb (about 36 kg). Plan a spot with enough floor space and an air line within reach.

Who it suits

It suits hobbyists restoring car and motorcycle parts, tool refurbishers, and DIYers cleaning metal before painting or coating. Oversized parts will not fit through the door or inside the cabinet.

What to check before you buy

• Compressor: confirm it supplies the CFM needed at your working pressure.
• Part size: measure your largest parts against the cabinet opening and interior.
• Media: choose a type suited to the surface, and keep it dry.
• Dust control: consider extraction, and wear suitable protective gear as the manual advises.
• Floor space and power: allow room for the stand and for lighting power.
• Consumables: plan for spare nozzles, gloves and lens protectors.

The short version

• A 60-gallon steel blast cabinet with stand, LED lighting and acrylic window.
• Rated by VEVOR at 5 cfm and 40-120 PSI; holds up to 203.4 lb of media.
• Includes a blasting gun, four ceramic nozzles and four lens protectors.
• Sealing strip and sealant to limit dust leakage.
• About 78.7 lb; assembly required.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.