Seesii K-801 Wall Mounted Wet/Dry Vacuum: features, specs and uses

The Seesii K-801 is a wet/dry vacuum designed to hang on a wall instead of taking up floor space. It has a 6.6-gallon tank, a 30-foot hose and a blower mode, so it can handle garage, workshop and car cleaning from a single mounting point. Here is what the numbers mean and what to confirm before choosing it.

Wall mounting and why it matters

Most workshop vacuums live on the floor, where they get in the way and collect dust underneath. The K-801 has a built-in bracket and ships with a wall mount set, a hose hanger bracket, expansion bolts and hollow wall anchors. Seesii says this keeps the unit off the floor and within reach in garages, workshops and storage rooms. The listing gives its weight as 6 lb, which is light for a wet/dry vacuum and makes wall mounting more practical. Whatever the wall is made of, use fixings suited to it and follow the instructions.

What 5.5 peak HP, 19 kPa and 50 CFM mean

"Peak" horsepower is a figure measured at start-up, not a steady running output, so it is best used for comparing similar models rather than predicting work done. The figures that describe cleaning more directly are suction and airflow. Seesii lists 19 kPa of suction and 50 CFM of airflow. In general, suction (pressure) helps lift heavy or embedded debris, while airflow moves lighter material such as sawdust and pet hair along the hose.

Wet, dry and blower modes

Seesii describes the K-801 as a 3-in-1 tool: it picks up liquid spills, takes dry debris such as sawdust and pet hair, and works as a blower for clearing leaves or damp areas. Wet and dry pickup normally call for different filter setups. This kit includes both a cartridge filter and a disposable dust bag, so check the manual for which to use for each job.

Hose, wands and attachments

The 30-foot flexible hose, plus two extension wands, gives long reach for shelves, car interiors and a large garage floor without moving the unit. The kit also includes a wide floor nozzle, a crevice nozzle, a brush nozzle, a socket wrench and an accessory storage bag. Long hoses lose some suction compared with short ones, so it helps to mount the unit near the middle of the area you clean most.

Capacity and size

The tank holds 6.6 gallons (about 25 litres), enough for a garage floor or a car detailing session before emptying. The listing gives dimensions of roughly 10 x 10 x 10 inches (25 cm each way).

Who it suits

It suits home garages, small workshops and storage rooms where floor space is limited, and people who want one vacuum for the car, the workbench and the occasional spill.

What to check before you buy

• Wall and fixings: confirm the wall can carry the unit and that the supplied anchors suit it.
• Power outlet: check the cord length and where the nearest outlet is relative to the mounting spot.
• Wet use: follow the manual for filters and for emptying the tank after wet pickup.
• Noise: these vacuums are loud; hearing protection may be sensible for long jobs.
• Parts: check how replacement filters and dust bags are supplied.

The short version

• A 6.6-gallon wet/dry vacuum with a built-in wall mount bracket.
• 5.5 peak HP motor, rated by Seesii at 19 kPa suction and 50 CFM airflow.
• 30-foot hose, two extension wands and three nozzles.
• Also works as a blower; weighs about 6 lb.
• Includes cartridge filter, dust bag, mounting hardware and storage bag.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.