Home / Tools & DIY · Product overviews / Paint, Wall Treatments & Supplies / Paint Sprayers · More from VEVOR
VEVOR RP8626 Plus 750W Airless Paint Sprayer: features, specs and uses
A cart-mounted 750W airless paint sprayer rated at 3000 PSI and 1.2 LPM, with variable speed and a detachable pump. What the specs mean for large painting jobs.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR RP8626 Plus is an electric airless paint sprayer built into a wheeled stand. It is meant for medium to large painting work such as interior walls, fences, furniture and exterior surfaces, where a roller or brush would take a long time. Here is what the specs mean and what to think about before using one.
How airless spraying works
An airless sprayer uses a pump to force paint at high pressure through a small tip, which breaks the paint into a fine fan-shaped spray without mixing in air. Compared with an air-driven sprayer, this typically handles thicker coatings and covers large areas quickly. The trade-off is that surfaces and anything nearby need masking, because fine mist travels.
Power, pressure and flow
VEVOR gives the motor as 750W, capable of up to 3000 psi, with a maximum flow of 1.2 litres per minute. The brand says this makes it up to five times faster than rolling and twelve times faster than brushing. Those are VEVOR's figures, and actual speed depends on the paint, the tip and your technique.
Higher pressure is not always better. The right tip size and a suitably thinned paint matter for a smooth finish, and the manual explains which materials the sprayer accepts.
Speed control
The sprayer has infinite speed control, so you can match the output to the job. VEVOR suggests using the low setting on large areas to reduce paint use. Lower speeds are also generally easier to control on detailed work, while higher speeds suit thick materials and wide, open surfaces.
Build and handling
VEVOR describes a full-metal frame, a professional rubber hose and an adjustable motor. The unit weighs 25.2 lb (about 11.4 kg) and stands about 37 inches tall, and the wheeled design lets you roll it between rooms or around a yard. An extension pole is included for high or low work, which reduces climbing and bending.
Cleaning
Cleaning is the part of airless spraying that most people underestimate. Paint left in the pump and hose can set and cause clogs. VEVOR says the pump body detaches for easier cleaning, and a cleaning brush is included for crevices and corners. Follow the manual's flushing steps for the type of paint you used, whether water-based or solvent-based.
Who it suits
It suits people who paint large areas: whole-house interiors, fences, sheds and decks. For a single small piece of furniture, the set-up and cleaning time may outweigh the speed gain.
What to check before you buy
- Paint type: confirm that the paints and coatings you plan to use are supported by the manual.
- Prep work: allow time to mask, cover floors and protect nearby surfaces.
- Ventilation: spraying indoors needs good airflow, and the manual's safety guidance applies.
- Power: check the outlet and any extension cord you plan to use.
- Size and storage: it is about 16 inches square and 37 inches tall.
- Cleaning supplies: plan for water or solvent, as the paint requires, for flushing afterwards.
The short version
- A 750W stand-mounted airless paint sprayer, model RP8626 Plus.
- Rated at up to 3000 psi and 1.2 LPM.
- Infinite speed control and fan-shaped atomisation.
- Wheeled cart, extension pole, rubber hose and metal frame.
- Detachable pump body and cleaning brush for upkeep.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.


