VEVOR PA800 1760 lb Electric Hoist: features, specs and who it suits

The VEVOR PA800 is a 120V electric hoist for lifting heavy items in garages, workshops, warehouses and factories. It has a 950W motor, a steel cable and a wireless remote, and it mounts overhead. Here is what the specs mean and what to confirm before using one.

Single line and double line lifting

The hoist offers two ways to run the cable, and the capacity changes with each. VEVOR gives these figures:

Mode	Load	Speed	Maximum height
Single line	880 lb	27.6 ft/min	40 ft
Double line	1,760 lb	13.8 ft/min	20 ft

The double line mode runs the cable through a pulley at the load, which typically doubles the pulling force at the cost of half the speed and half the height. That's why the heavier capacity comes with a lower lift. Always match the load to the mode and stay within the rated limits.

Motor and cooling

VEVOR lists a 950W motor and a large cooling fan to prevent overheating. Hoists are usually designed for intermittent use, with rest between lifts, so check the manual for duty-cycle guidance. The steel body is described as resistant to deformation.

Cable, hook and slings

The cable is a 19-strand steel wire rope with a high-strength metal hook, according to VEVOR. The hoist comes with a 13 ft lifting sling strap and a 3.2 ft strap with a metal ring. Inspect the cable, hook and straps before every use, and replace anything frayed, kinked or worn.

Wireless remote and emergency stop

The remote has a stated range of 328 ft, so the operator can stand clear of the load and watch the lift without a trailing cord. There is also an emergency stop button. Wireless range depends on the surroundings, and walls and metal can reduce it.

Mounting

VEVOR says the hoist hangs from a ceiling or beam using mounting brackets and takes two steps to install. Whatever you hang it from must carry the full rated load plus the hoist's own weight of about 39 lb (17.7 kg). The unit measures about 16.1 x 5.7 x 7.9 inches (41 x 14.5 x 20 cm). Have a qualified person check the support structure.

Who it suits

It suits home garages, workshops, small warehouses and factories that need to raise engines, equipment, materials or stock. VEVOR describes it as suitable for professionals and amateurs.

What to check before you buy

• Load: confirm your heaviest item, including rigging, is well inside the capacity for the mode you'll use.
• Height: compare the 40 ft and 20 ft maximums with your lift.
• Power: it needs a 120V supply; check the outlet and circuit.
• Support: confirm the beam or ceiling can carry the load, and follow the manual and local codes.
• Use: hoists like this are for lifting loads. Check the manual about people and overhead use.

The short version

• A 120V, 950W electric hoist with a steel wire rope.
• 880 lb at 27.6 ft/min on a single line; 1,760 lb at 13.8 ft/min on a double line.
• 328 ft wireless remote with an emergency stop.
• Includes a 13 ft sling strap and a 3.2 ft strap with ring.
• Weighs about 39 lb; check the mounting point and manual.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.