Home / Tools & DIY · Product overviews / Crafting · More from VEVOR
VEVOR LSSJ-515 11-Inch Pottery Wheel: features, specs and who it suits
A 350W electric pottery wheel with an 11-inch turntable, foot pedal, 60-300 rpm speed range and a lift-top that rises 0-6 inches. What the specs mean in practice.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR LSSJ-515 is an electric pottery wheel with an 11-inch (28 cm) turntable and a 350W brushless motor. It is meant for people who want to throw bowls, vases and cups at home, in a classroom or in a studio without a large, fixed machine. Here is what its main features mean for the person sitting at it.
What the turntable and basin do
The wheel head is made of aluminium alloy and measures 11 inches across. A larger head gives room to centre bigger lumps of clay and to throw wider pieces such as platters and large bowls. VEVOR says the attached ABS basin stops slip and water from splashing around the workspace, and that it detaches for cleaning. Pottery is a wet, messy craft, so a basin that lifts out and rinses easily matters more than it sounds.
Speed, direction and the foot pedal
Speed is set with a separate foot pedal, which leaves both hands free for the clay. VEVOR gives a range of 60 to 300 rpm. In general, slow speeds suit centring heavy clay and trimming, while faster speeds suit pulling up walls and refining a shape. The wheel can run clockwise or counterclockwise, which helps left-handed potters and anyone who prefers to throw in the opposite direction.
Direction is chosen from a waterproof panel on the display. The brand rates the motor noise at 60 dB, which it describes as low. A brushless motor typically runs more quietly and needs less upkeep than a brushed one because there are no carbon brushes to wear out.
A lift-top that adjusts to your height
The tabletop can be raised or lowered over a range of 0 to 6 inches (0-150 mm). Seat and wheel height decide how comfortable a long session is, so being able to adjust the wheel for different users helps in a shared setting such as a class. VEVOR also describes a triangular structure on a heavy base that keeps the machine steady while it runs, and reinforced pads on the underside that protect the floor.
Safety features
The listing describes a single-phase, three-wire connection with an earth leakage protection device. Water and electricity share the workspace in pottery, so it is sensible to keep the power connection and the controls away from splashes and to follow the manual on placement and grounding.
Tools in the box
The kit comes with eight stainless steel tools and eight wooden tools for shaping, trimming and smoothing. VEVOR positions the wheel for school teaching, pottery bars and home use, and says it supports both beginners and experienced ceramicists. The machine measures 19.7 x 16.1 x 15.7 inches (about 50 x 41 x 40 cm) and weighs 30.5 lb (about 14 kg), so it needs a sturdy table or stand and a spot where it can stay set up.
Who it suits
It fits hobby potters, classrooms and small studios that want a compact electric wheel with an adjustable height and a pedal. Anyone planning to throw very large or very heavy pieces should look at the motor's power against the clay weight they have in mind.
What to check before you buy
- Clay weight: compare the 350W motor against the size of the pieces you plan to throw.
- Space and surface: the wheel weighs about 30 lb, so check you have a strong, level table or stand and room for the pedal.
- Power and water: confirm a suitable outlet, keep it clear of splashes and follow the manual.
- Height: try the lift-top range against your seat and the height of the people who will use it.
- Cleaning: plan where the basin will be emptied and rinsed; clay slurry should not go straight down a household drain.
- What's included: check the tool sets against what you already have.
The short version
- An electric pottery wheel with an 11-inch aluminium alloy turntable and a 350W brushless motor.
- Foot pedal control from 60 to 300 rpm, clockwise or counterclockwise.
- Lift-top adjusts 0-6 inches; detachable ABS basin for cleaning.
- Earth leakage protection, and 8 stainless steel plus 8 wooden tools included.
- About 30.5 lb; suited to home, classroom and small-studio use.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.


