Home / Tools & DIY · Product overviews / Crafting · More from VEVOR
VEVOR 30 lb Wax Melter for Candle Making: features, specs and who it suits
An 1100W electric wax melting pot with a heated pour spout, 86–230°F control and a 30 lb capacity for candles and soaps. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR ML-15L is an electric wax melting pot with a 30 lb capacity. It is meant for candle makers who pour in batches, and VEVOR also lists soaps, lipsticks and other beauty products among its uses. A heated spout lets you pour straight into moulds or containers.
Heating and melting speed
The pot has an 1100W heating system with a large coil. VEVOR says it melts up to 2.2 lb of soy wax in 10 minutes. That is the brand's figure, and in practice melting time depends on the wax, the starting temperature and the batch size. Filling the pot with more wax takes longer.
The temperature can be set from 86°F to 230°F (30°C to 110°C). Different waxes melt and pour at different temperatures: soy, coconut, paraffin and beeswax each have their own recommended range, so check your wax supplier's data before you set the dial. Holding wax well below its flash point is a standard rule in candle making.
Pour spout and hourglass base
A built-in heated spout is designed to keep wax flowing so it doesn't clog or drip. VEVOR also describes an hourglass-shaped bottom that helps wax run out smoothly instead of leaving pools in corners. A clean pour matters when filling many small containers, and a heated spout reduces the chance of wax solidifying at the outlet.
Protection and base
The listing mentions overheating protection, a heat insulation shield and a stable base. Heated wax is hot enough to burn, so a stable footing and a shield around the pot help. Keep the pot on a level, heat-resistant surface, and never leave melting wax unattended.
Accessories and ease of use
VEVOR describes it as suitable for beginners and says the included accessories help you get started. Check the product listing for exactly what is supplied before ordering wicks, moulds or containers.
Size and weight
It measures about 13.0 x 12.4 x 22.2 inches (33 x 31 x 56 cm) and weighs 9.3 lb (about 4.2 kg), so it needs a dedicated bench or table rather than a small shelf. The height includes room for the pour spout.
Who it suits
The specs suit hobbyists scaling up, small candle and soap businesses, market-stall sellers and crafters who pour many pieces in a session. Someone making a single candle now and then may find a smaller pot easier to put away.
What to check before you buy
- Wax types: confirm the temperature range covers your wax and any fragrance additives.
- Batch size: check the working capacity of the pot, not just the 30 lb figure.
- Space and storage: allow for a bench, plus room to keep the pot when cool.
- Power: confirm your outlet suits an 1100W heater.
- Cleaning: check how to remove residue from the pot and spout, and never pour wax down a drain.
- Fire safety: keep a lid or suitable extinguisher nearby, and follow the manual.
The short version
- An 1100W electric wax melter with a 30 lb capacity.
- 86°F to 230°F temperature range, heated spout and hourglass base.
- VEVOR rates it at 2.2 lb of soy wax in 10 minutes.
- Overheat protection, heat shield, stable base; 9.3 lb.
- Suits batch pouring of candles, soaps and similar craft products.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
