VEVOR LES-500 Electric Hoist Winch, 1100 lb: features, specs and who it suits

The VEVOR LES-500 is a portable electric hoist winch rated to lift 1100 lbs (about 500 kg). It can be used for lifting and for pulling, and it comes with both a wired and a wireless remote. It is aimed at garages, workshops, warehouses and farms, where moving heavy loads by hand is slow or awkward.

Lifting capacity and speed

VEVOR rates the hoist at 1100 lbs, with a lifting height of up to 98 ft and a lifting speed of up to 36 ft/min. The listing describes the body as high-strength carbon steel and cast aluminum. A rated capacity is the maximum load under the conditions the manufacturer specifies, so it is sensible to stay well within it and to follow the manual on how the load is rigged.

The listing gives the motor power as 1800 W in one place and 1500 W in another. Check the label or manual for the correct figure, because it affects the electrical supply you will need.

Two ways to control it

VEVOR calls this a 2-in-1 design. A wired controller with a 22.3 ft cable is meant for close-range work in a workshop or warehouse, where you stand near the load and want precise control. A wireless remote is listed with a range of 492 to 656 ft, for jobs where you want to operate the hoist from a distance or from a different position. Wireless range in practice depends on the surroundings, so treat the figure as the maximum under open conditions.

Hook, cable and limit switch

The hoist has a double hook design with a 2.2-inch opening. VEVOR says the wide opening suits a range of hanging points and helps with stability. The cable is galvanized steel wire rope, 5 mm in diameter, with a maximum tensile strength of 1520 MPa.

A limit switch is included. On hoists, a limit switch typically stops the motor when the hook reaches the end of its travel, which protects the mechanism. An efficient fan cooling system is also listed, intended for steady performance during longer use.

Pulling and lifting

The listing describes both pulling and lifting. Hoists and winches are built differently, and the manual should be your guide on which uses the unit is designed for, and what angles and set-ups it allows. VEVOR names home garages, construction site tasks, small workshop loading and unloading, and farm work as typical settings.

Size and weight

The unit measures about 19.7 x 9.8 x 7.9 inches and weighs 44.1 lb (about 20 kg). That is portable in the sense that one person can carry it to the job and mount it, but it is not light.

Who it suits

It suits people who regularly lift or position heavy items, such as engines, building materials or stock, and who have a sturdy overhead anchor point and a suitable power outlet.

What to check before you buy

• Load: check the weight of what you plan to lift against the 1100 lb limit, with margin.
• Mounting point: the anchor or beam must be strong enough, and the manual describes how to attach it.
• Power: confirm the motor power and the outlet or circuit you will use.
• Cable length: compare the 98 ft lift and the 22.3 ft wired controller with your space.
• Remote range: check how far you will be from the hoist when using the wireless remote.
• Safe use: read the manual on safe working practice, inspection and keeping people clear of the load.

The short version

• VEVOR LES-500 portable electric hoist winch rated at 1100 lbs.
• Lifts up to 98 ft at up to 36 ft/min, per VEVOR.
• 22.3 ft wired controller plus a wireless remote with a listed range of 492 to 656 ft.
• Double hook with a 2.2-inch opening, 5 mm galvanized steel wire rope and a limit switch.
• About 44.1 lb; motor power is listed as both 1800 W and 1500 W, so confirm before use.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.