VEVOR JH-65 3500W Electric Demolition Hammer: features, specs and uses

The VEVOR JH-65 is a corded electric demolition hammer for breaking up concrete, block, brick and tile. It drives a chisel into the material with rapid blows rather than spinning it like a drill. This type of tool is used for removing slabs, cutting trenches and opening holes in walls and floors.

Power and impact energy

VEVOR gives the motor as 3500W with 60J of impact energy. Impact energy, measured in joules, is the energy of each blow, and in general a higher figure breaks harder or thicker material faster. The brand says the tool is intended for professionals and works on concrete and metalworking projects. It runs on 110V, so check that your supply and cables can handle a tool of this power.

Construction

The body is heavy-duty aluminium, which VEVOR says is durable and resistant to corrosion. The handle is plastic, which the brand says is to avoid electric shock hazards. Even so, treat any corded power tool with care, and follow the manual and local rules.

Chuck and chisels

A high-strength alloy chuck takes the impact of demolition work. VEVOR says it allows quick assembly and disassembly, and that a chisel stays put once it is clamped. Two bits are included: a flat chisel, usually used for cutting channels and scraping, and a point chisel, usually used for breaking into material and starting cuts.

Comfort features

Breaking concrete is hard on hands and arms, so VEVOR lists some comfort features:

• A shock absorption structure with double springs, which the brand says saves effort.
• A 360° rotary handle to reduce fatigue and help in narrow spaces.
• A locking button that keeps the tool running without holding the trigger.
• A cooling system that VEVOR says helps the motor stay at low temperature after long working periods.

A carry case is included for transport.

Typical applications

The brand lists demolition, trenching, chipping, and breaking holes in concrete, block, brick and tile. It also names pipeline work, drainage construction, foundation removal, interior decoration and more. Before cutting into any wall or slab, check for hidden pipes and cables.

Size

The listing gives dimensions of 26.5 x 4.7 x 12.5 inches (about 67 x 12 x 32 cm). Weight is not given, so check that before judging how long you could use it overhead.

What to check before you buy

• Power supply: make sure your outlet, circuit and extension cable suit 110V and 3500W.
• Job size: a tool of this class suits heavy work; lighter jobs may not need it.
• Weight: confirm the weight and handling for your build and your job.
• Protection: wear hearing and eye protection, gloves and dust control as the manual advises.
• Chisels: check that you can get replacement chisels for the chuck.
• Hidden services: locate pipes and wires before breaking.

The short version

• A 110V, 3500W electric demolition hammer with 60J impact energy.
• Aluminium body, alloy quick-change chuck, plastic handle.
• Double-spring shock absorption, 360° rotary handle and locking button.
• Includes a flat chisel, a point chisel and a carry case.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.