Home / Tools & DIY · Product overviews / More Tools & DIY · More from VEVOR
VEVOR BR94VR 7-Tier Rolling Bin Rack: features, specs and who it suits
A double-sided mobile storage rack with 94 plastic bins, four casters and a flip-top lid. What the VEVOR BR94VR offers and what to check for your space.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR BR94VR is a double-sided rolling rack that holds 94 plastic bins on seven tiers. It is meant for small parts, fasteners, tools and supplies that otherwise end up in boxes and drawers. Because it sits on wheels, the whole collection can move to wherever the work is happening.
What comes in the set
VEVOR lists 94 bins in two sizes: 64 medium blue bins and 30 large grey ones. Each bin has a label slot, so contents can be marked and found quickly. The bins are made from polypropylene (PP), a common plastic for storage containers, and VEVOR gives the wall thickness as 0.07 inch (2 mm). The brand says they resist impact and chemicals, which matters in a garage or workshop where oils and cleaners are around.
Having bins on both faces of the rack is the main idea. A single-sided wall unit uses one face only, while a double-sided rack puts two walls of storage into one footprint.
How the bins are held
The bins hang on the frame with a peg-back mount. In general, a hanging bin sits snugly on the rails and can be lifted off for carrying to a workbench, which is handy when you need one drawer of parts rather than the whole rack. VEVOR says the snug fit cuts shake while the rack is moving, so items stay put.
Frame and finish
The frame is Q235 steel with a powder-coat finish. Q235 is a common structural carbon steel grade, and powder coating is a baked-on paint layer that usually resists chipping and light corrosion better than ordinary paint. VEVOR says the finish resists corrosion. Even so, it is a good idea to keep any steel rack out of standing water.
Moving it around
Four rubber swivel casters support the rack, and two of them lock. There is a side handle for steering. VEVOR rates the rack for a 360 lb (163 kg) push load. Locking casters matter: once the rack is parked, they keep it from drifting, which is useful if you are pulling bins in and out.
The flip-top lid
The top has a reversible lid that flips over to give a work or storage surface. VEVOR describes it as a place for go-to tools within easy reach. Treat it as a light shelf and check the manual for any weight limit before stacking heavy items there.
Size and weight
The listed dimensions are 35.4 x 19.7 x 49.0 inches (about 90 x 50 x 124 cm), and the rack weighs 57.3 lb (about 26 kg) before the bins are filled. That makes it a mid-sized unit. It fits along a garage wall or in a corner of a workshop, but not in a tight cupboard.
Who it suits
It suits home garages, hobby workshops, classrooms, offices and small commercial spaces such as kitchens or stock rooms. VEVOR names garage, warehouse, office, restaurant, classroom and kitchen uses. Anyone who keeps hundreds of small items, such as screws, electronics, craft supplies or spare parts, will find a bin system easier to sort than loose boxes.
What to check before you buy
- Floor space and doorways: confirm the rack's footprint and height fit where you want to park it and the routes you will roll it along.
- Floor surface: casters roll best on smooth, level floors. Gravel or deep thresholds can make a loaded rack hard to move.
- Bin sizes: compare the medium and large bins with the items you plan to keep in them. Bin dimensions aren't given in the details here, so check the manual.
- Load limits: look up the weight limit per bin and for the whole rack, and spread heavy items low down.
- Assembly: a rack of this size typically ships flat and needs some time to put together, so check what tools the manual calls for.
- Replacement parts: see whether single bins can be bought separately if one cracks or goes missing.
The short version
- A seven-tier, double-sided rolling rack with 94 PP bins (64 medium, 30 large), model BR94VR.
- Q235 steel frame with powder-coat finish; bins attach with a peg-back mount.
- Four swivel casters, two locking, a side handle and a 360 lb (163 kg) push load.
- Reversible flip-top lid for extra surface; label slot on every bin.
- About 35.4 x 19.7 x 49.0 inches and 57.3 lb empty.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.


