VEVOR ACDC TIG-225 6-in-1 TIG Welder: modes, materials and features

The VEVOR ACDC TIG-225 is an inverter-based TIG welder that also welds with stick electrodes. It combines six modes in one machine and can weld aluminum as well as steel, which is the main reason people choose AC/DC TIG. Here is what the modes and features mean and who the machine is aimed at.

Six modes in one machine

VEVOR lists six modes: AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, Spot TIG and MMA (stick).

• DC TIG is the standard mode for steel, stainless steel, copper and titanium.
• AC TIG alternates the current, which breaks up the oxide layer on aluminum so it can be welded.
• Pulse switches the current between high and low levels, which typically limits heat input on thin material.
• Spot TIG makes tack-style spot welds.
• MMA/stick uses a flux-coated electrode, a common choice for outdoor repairs and rusty or dirty steel.

Materials and thickness

VEVOR says the machine suits carbon steel, copper, stainless steel and titanium, and handles 6010, 6011, 6013 and 7018 electrodes. It lists capability to weld 1/4 inch aluminum and 3/8 inch low carbon steel. Those figures are the brand's and depend on technique, material preparation and supply power.

High-frequency start

The welder uses high-frequency, non-contact arc starting. The arc jumps from the tungsten to the work without touching it, which avoids contaminating the tungsten and the weld at the start. This is standard on better TIG machines and helps with thin material.

Inverter technology and protections

An IGBT inverter converts mains power into the welding current electronically. In general, inverter welders are much lighter and more energy-efficient than older transformer designs; this one weighs 36.6 lb (about 16.6 kg) and measures roughly 16.9 x 8.3 x 14.2 inches. VEVOR lists VRD (voltage reduction device), overcurrent, overvoltage, overload and overheat protection. Welding involves electrical hazards, fumes and arc light, so the manual's guidance on protective gear, ventilation and supply wiring applies.

Display and aluminum wire

A digital LED display shows the settings. VEVOR also says the machine is compatible with spool guns designed for aluminum welding, which feed soft aluminum wire more smoothly than a standard torch. Confirm the exact spool gun model and connector in the documentation.

Who it suits

It suits hobbyists and garage fabricators who want to learn TIG, repair shops handling both steel and aluminum, and people maintaining farm or road equipment. TIG is a skill-intensive process that needs two hands and a foot or finger control, so beginners should expect a learning curve.

What to check before you buy

• Power supply: confirm the input voltage and current the machine needs and whether your outlet or circuit can supply it.
• Included parts: check whether the torch, ground clamp, regulator and foot pedal are in the box.
• Shielding gas: TIG needs an inert gas, typically argon, with a cylinder and regulator.
• Material range: compare the stated thickness limits with your projects.
• Consumables: tungsten electrodes and filler rods are bought separately.
• Safety gear: you will need a proper helmet, gloves and ventilation.

The short version

• A 6-in-1 inverter welder: AC and DC TIG, both with pulse, Spot TIG and stick.
• High-frequency start and a digital LED display.
• VEVOR says it welds up to 1/4 inch aluminum and 3/8 inch low carbon steel.
• Includes VRD and overload, overcurrent, overvoltage and overheat protection.
• Weighs about 36.6 lb.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.