VEVOR 1400W Electric Demolition Jackhammer Kit: features, specs and who it suits

The VEVOR 1400W Electric Demolition Jackhammer is a corded breaker for chipping and breaking concrete, brick, block and tile. It comes in a carry case with two chisels and gloves, and VEVOR aims it at both professionals and home users. It is a mains-powered alternative to larger pneumatic or petrol breakers.

Power, impact energy and blows per minute

Three figures describe how a demolition hammer works. The motor is rated at up to 1400W, which is electrical input. Impact energy is 19 joules, the energy delivered by each blow, and it is usually the most useful number for judging how hard the tool hits. The blow rate is 2,900 BPM (blows per minute). Together, a high blow count with a moderate energy per blow suits chipping, trenching and breaking slabs, whereas heavier jobs such as thick reinforced concrete typically call for tools with much higher impact energy.

Chisels and the hex shank

The kit has two bits: a flat chisel for scraping, chipping and cutting back material, and a point chisel for breaking up concrete. The tool takes 5/8 inch hex shank bits, and VEVOR says the chisels are replaceable with most bits of that size. Check the manual, though, since the shank length and any locking collar need to match the chuck. Keeping the bits sharp makes a big difference to speed and reduces how hard the tool must work.

Handles and vibration

Breakers produce a lot of vibration, and the handle design is where manufacturers put effort. VEVOR says the shock-absorbing handle has extra springs and a larger trigger switch, and that a 360° rotating handle helps with awkward or narrow spaces and reduces fatigue. Whatever the design, use short work periods and rests, and follow the manual's guidance on hearing protection, eye protection and dust control. Concrete dust should never be breathed in, so wet methods or a suitable mask are standard advice.

Cooling and the case

VEVOR describes an efficient cooling system to keep the motor temperature down during long sessions. Corded tools generally last longer when vents are kept clear of dust. The carry case holds the tool and chisels and makes it simpler to transport between sites. It weighs 16.9 lb (about 7.7 kg) and measures 18.5 x 3.9 x 9.8 inches (about 47 x 10 x 25 cm), which is light enough for work at waist height or on a wall.

Power supply

The listing calls it a 110V tool. A 1400W load draws roughly 12 to 13 amps at that voltage, so use an outlet on a suitable circuit and, if you need an extension, a heavy-gauge cord rated for the load. Follow local codes and the manual.

Who it suits

It suits renovation work such as removing tile, breaking a small concrete slab, chipping out a trench or opening a hole in block. It can serve tradespeople with light duties and homeowners with occasional projects. Large-scale demolition or daily heavy use generally calls for a bigger, higher-energy machine.

What to check before you buy

• Task size: compare 19J of impact energy with the thickness and strength of what you'll break.
• Power: check outlet voltage and circuit capacity, and the length and gauge of any extension cord.
• Bits: confirm the 5/8 inch hex shank fits the accessories you want to use.
• Protection: plan for ear, eye, hand and dust protection.
• Underground services: locate pipes, cables and rebar before breaking into a wall or floor.
• Weight: 16.9 lb is manageable on the floor but tiring overhead.

The short version

• A corded VEVOR demolition hammer rated at up to 1400W, 19J impact energy and 2,900 BPM.
• Two hex-shank chisels (flat and point), gloves and a carry case included.
• Shock-absorbing handle, larger trigger and 360° rotating handle.
• Cooling system for the motor; about 16.9 lb (7.7 kg).
• Intended for concrete, block, brick and tile work of light to moderate scale.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.