VEVOR 1-Color Screen Printing Press: features, specs and who it suits

The VEVOR 1 Color 1 Station Screen Printing Press is a small manual press for printing a single colour at a time through a mesh screen. It holds the screen frame above a flat pallet, so the screen lands in the same place every time. That repeatable position is what makes it more practical than printing freehand, whether the project is T-shirts, tote bags or flat craft items.

What "1 color, 1 station" means

In screen printing, each colour in a design is printed through its own screen. A one-station press has one arm that holds one screen at a time. For a design with several colours, you print one colour, change the screen and print the next. Multi-station presses hold several screens at once, but they take more space. VEVOR positions this one for people with limited room and occasional printing.

Print area and pallet

The pallet measures 21.2 x 17.7 inches (54 x 45 cm), which VEVOR gives as the print area. The listing says the press accepts screen frames up to 23.6 x 27.5 inches (60 x 70 cm) with a frame thickness under 1.9 inches. The pallet is the flat surface that supports the item being printed, and a double-layer design is meant to help with positioning.

Springs, bearings and tension

The press uses double springs. These counterbalance the weight of the screen frame, so the arm stays lifted when you raise it and settles gently when you lower it. VEVOR says the spring tension can be adjusted for frames of different weights, which matters because a large frame loaded with ink is heavier than an empty one. The listing also mentions independent metal bearings in the body, intended to keep movement stable and registration accurate.

Materials

VEVOR says the body is cold-rolled steel with an electrostatic spray finish, with carbon steel springs and a 304 stainless steel rod. The assembled press weighs about 24.4 lb (11.1 kg), so it is steady enough to hold still while you press down with a squeegee.

What you can print on

The listing names clothing, pillowcases, fabrics, metal, paper, plastic, wood, glass, ceramic and leather, which are all flat surfaces that accept screen printing ink. The ink type matters: textile inks suit fabric, while other inks suit paper or hard surfaces. You will also need your own screens, squeegee and ink, as these are not listed in the package.

Setup and what is in the box

The press arrives unassembled. According to VEVOR, the package includes the press, a double-ended wrench (sizes 14 and 17), a single-ended spanner (size 17), a screwdriver, two hex wrenches (sizes 5 and 8), a manual and a bill of materials. The packed item measures about 24.4 x 20.1 x 6.3 inches (62 x 51 x 16 cm).

Who it suits

It suits hobbyists, craft sellers and small businesses who print occasionally or in small runs and want a compact one-colour setup. If you need many colours in a single pass or high volume, a multi-station press is the more typical choice.

What to check before you buy

• Frame size: confirm your screens fit within the stated 23.6 x 27.5 in limit and the thickness limit.
• Design size: check your artwork fits inside the 21.2 x 17.7 in print area.
• Extras: screens, squeegees, ink and a way to cure the ink are separate purchases.
• Workspace: allow a stable table and room to lift the arm.
• Assembly: set aside time to assemble and align it, following the manual.
• Colours: plan how you will register multiple colours, since there is one station.

The short version

• A one-colour, one-station manual screen printing press.
• 21.2 x 17.7 in print area; accepts frames up to 23.6 x 27.5 in.
• Double springs with adjustable tension and metal bearings.
• Cold-rolled steel body, about 24.4 lb.
• Arrives unassembled with the basic tools.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.