TP-Link Omada EAP245 V3 AC1750 Access Point: features, specs and who it suits

The TP-Link EAP245 V3 is a wireless access point from the company's Omada range. Unlike a home router, an access point adds Wi-Fi to a wired network and is typically mounted on a wall or ceiling. This one is aimed at offices, shops and larger homes where several devices need dependable coverage.

Speeds and MU-MIMO

The EAP245 uses 802.11ac Wave 2 and is dual band. TP-Link lists 450 Mbps on 2.4 GHz and 1300 Mbps on 5 GHz, adding up to the 1750 Mbps in its AC1750 name. That total is a combined figure across both bands, not a speed any one device will reach. MU-MIMO lets the access point send data to several compatible devices at once instead of one after another, which typically helps in busy rooms.

Wireless features

TP-Link lists band steering, which moves dual-band devices onto the faster 5 GHz band, plus airtime fairness, beamforming and load balancing for high-density networks. It also supports mesh Wi-Fi and seamless roaming, meant to keep video streams and voice calls going as people move between access points. TP-Link notes that Omada Mesh and seamless roaming need an Omada SDN controller.

Omada management

Omada is TP-Link's software-defined networking system. It brings access points, switches and gateways under one interface, using a hardware controller, a software controller or a cloud-based controller. TP-Link says the cloud access and the Omada app allow centralised management of several sites. The unit can also run in standalone mode. The listing warns that SDN controllers work only with SDN access points, switches and gateways, so check that your equipment is compatible.

Guest access and security

The listing mentions a guest network with several authentication options, including SMS and vouchers, along with wireless security technologies. It also supports a management VLAN, which separates management traffic from regular user traffic.

Powering it with PoE

The EAP245 accepts 802.3af/at Power over Ethernet and passive PoE. You can power it from a PoE switch, or from the PoE adapter provided, which means a single network cable can carry both data and power to the ceiling.

Size and support

It measures about 8.1 x 7.2 x 1.5 inches (roughly 21 x 18 x 4 cm) and weighs 0.8 lb (around 360 g). TP-Link lists a 5-year warranty and technical support from 6am to 6pm Pacific time on weekdays.

Who it suits

It suits small businesses, offices and larger homes that want to grow a managed Wi-Fi network by adding access points under one controller.

What to check before you buy

• Whether you plan to use an Omada controller, or standalone mode.
• That your other Omada gear is SDN compatible.
• Where the access point will be mounted and whether a network cable reaches that spot.
• Your PoE source, either a switch or the included adapter.
• Whether your devices support 5 GHz and 802.11ac.
• The number of devices and users in the space.

The short version

• Dual-band AC1750 access point with MU-MIMO.
• Supports mesh, band steering and seamless roaming with an Omada controller.
• Managed through Omada cloud, app or controllers.
• Powered by 802.3af/at or passive PoE.
• 5-year warranty from TP-Link.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.