Home / Tech · Product overviews / Computers & Accessories / Wireless Access Points · More from TP-Link
TP-Link Omada EAP211-Bridge KIT Outdoor Wireless Bridge: specs and uses
A pre-paired two-unit 5GHz outdoor wireless bridge kit with up to 867Mbps, a range of up to 1km, three Gigabit ports and an IP65 weatherproof case.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The TP-Link Omada EAP211-Bridge KIT is a pair of outdoor-ready wireless units that link two locations without running a cable between them. It is a point-to-point bridge: one unit connects to the network at one end, the other connects to devices at the far end, and the two talk over a 5GHz wireless link. Typical uses include linking a house to an outbuilding, a camera at the edge of a property, or two parts of a business site.
How a wireless bridge works
Instead of a router creating a Wi-Fi network for phones and laptops, a bridge forms a dedicated wireless link between two fixed points. The units face each other, and what goes in one end comes out the other as if connected by a cable. TP-Link also lists support for point-to-multipoint use (PtMP), where one unit serves several others.
Speed and range
TP-Link lists the link at up to 867Mbps on the 5GHz band, using Wi-Fi 5. It also lists a long-range transmission of up to 0.6 miles (1km). Both are maximum figures. Real performance depends on distance, obstructions and interference, and 5GHz links typically need a clear line of sight between the two units. Trees, buildings and weather can all reduce range.
Pre-configured kit
The product is sold as a two-piece kit. TP-Link says the pair is pre-configured, with auto-pairing and LED indicators, which saves deployment time and effort. In general, that means you mount the units, power them and align them, rather than configuring each one by hand.
Three Gigabit ports and power options
Each unit has three 1000Mbps ports, giving flexible options for connecting a switch, a camera or other devices. Power comes through Power over Ethernet (PoE) or a DC adapter, and TP-Link says a PoE adapter is included. With PoE, a single cable carries both data and power to the unit, which is useful where an outdoor outlet isn't nearby.
Built for outdoors
TP-Link gives the enclosure an IP65 classification, meaning it is designed to be dust-tight and to resist water jets, and adds 6kV lightning protection. These figures describe the enclosure, so follow the manual for mounting, cable entry and grounding.
Omada cloud management
The units can be managed through TP-Link's Omada cloud platform, which can also handle access points, switches and gateways in a single system. That suits sites already using Omada hardware. Check the product's documentation to see how it is configured if you don't use Omada.
Size and weight
Listed dimensions are about 4.8 x 2.5 x 8.9 in, with a weight of 3.0 lb.
Who it suits
It suits homeowners, farms, small businesses and installers who need to carry a wired network across a yard or between buildings where trenching a cable is impractical.
What to check before you buy
- Line of sight: confirm there is a clear path between the two mounting points.
- Distance: compare your distance with the 1km maximum and allow for a margin.
- Mounting: plan poles or wall mounts and aim the units carefully.
- Power: decide whether you'll use PoE or DC at each end.
- Regulations: check local rules for 5GHz outdoor use.
- Electrical safety: follow the manual and local codes for outdoor wiring and grounding.
The short version
- Pair of pre-configured 5GHz outdoor bridge units for point-to-point links.
- Up to 867Mbps and a stated range of up to 1km.
- Three Gigabit ports per unit; PoE or DC power with a PoE adapter included.
- IP65 weatherproof enclosure with 6kV lightning protection.
- Manageable through the Omada cloud platform.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
