TP-Link SG2210P 8-Port PoE+ Smart Switch: features, specs and who it suits

The TP-Link JetStream SG2210P is a managed gigabit switch with eight PoE+ ports and two SFP slots. It is designed for small networks that need powered ports, traffic control and a silent unit.

PoE+ and the 58W allowance

PoE+ (802.3at) sends data and power over one Ethernet cable, which suits devices such as wireless access points, IP cameras and phones. TP-Link lists eight PoE+ ports and a total PoE power of 58W, along with power management features. The 58W is shared across all ports, so a single PoE+ device, which can draw up to about 30W, uses a large part of it. Add up your devices' draw before you plan.

Gigabit ports and SFP slots

All ports run at gigabit speed. The two SFP slots take modules, usually fibre or copper, for uplinks to another switch or a distant location. The modules are sold separately. L2/L3/L4 QoS and IGMP snooping are listed for voice and video, which in general helps prioritise time-sensitive traffic and manage multicast streams.

Security features

TP-Link lists 802.1Q VLAN, ACL, Port Security and storm control. VLANs divide one switch into separate logical networks, ACLs filter traffic by rules, port security limits which devices can connect, and storm control limits runaway broadcast traffic.

Management

The switch can be managed through a web interface or CLI, with SNMP and RMON listed. "Smart" switches usually offer many managed features at a simpler level than a full enterprise switch.

Fanless design and efficiency

The switch is fanless, so it makes no fan noise, which helps in offices and homes. TP-Link says its energy-efficient technology saves up to 50% of power consumption.

Size

It measures about 8.2 x 5.0 x 1.0 inches (21 x 12.7 x 2.5 cm) and weighs 2.9 lb (about 1.3 kg), per the listing. Model number TLSG2210PV5.0 is listed.

Planning a small PoE network

A typical layout puts the switch near the router, with cable runs out to access points and cameras and one SFP slot or gigabit port as the uplink. Because the power allowance is shared, it helps to list each device's maximum draw first. Devices that need less power, such as many phones and small cameras, leave more room for the rest. The management features also let you place cameras and guest devices on separate VLANs from office computers.

Who it suits

It suits small offices, home labs and installations with a few access points or cameras that need VLANs and a quiet unit. Large PoE deployments would need a higher power allowance.

What to check before you buy

• PoE capacity: add up your devices' draw and compare it with 58W.
• Uplinks: decide whether you need SFP modules and which type.
• Management style: confirm web or CLI suits you.
• Placement: check the desktop or rack-mount options in the manual.
• Hardware version: check the listed version (V5.0) matches your firmware needs.
• Local codes and the manual: follow them for installation and powering.

The short version

• An 8-port gigabit smart switch with PoE+ and two SFP slots, SG2210P.
• 58W total PoE power.
• 802.1Q VLAN, ACL, Port Security and storm control.
• Web and CLI management, SNMP and RMON.
• Fanless design.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.