TP-Link EAP670 V2 Omada Wi-Fi 6 Access Point: features, specs and who it suits

The TP-Link EAP670 V2 is a ceiling-mount Wi-Fi 6 access point for the Omada networking system. It is designed for places that need steady wireless coverage, such as offices, classrooms, hotels and cafés, and it is managed centrally rather than one device at a time.

What AX5400 means

AX5400 is a combined, theoretical figure for a dual-band Wi-Fi 6 radio set. TP-Link says the EAP670 reaches up to 5400 Mbps across its two bands and lists 1024-QAM and Long OFDM Symbol among the technologies behind it. Real-world speeds are lower and depend on distance, walls, the client devices and how many people share the connection. No single device will see the full combined figure.

Wi-Fi 6 features for busy spaces

Wi-Fi 6 is built to handle many devices at once. OFDMA divides a channel so several devices can be served together, and MU-MIMO lets the access point talk to multiple devices simultaneously. TP-Link also lists band steering, load balancing, airtime fairness and beamforming, which in general move devices to the better band, spread them out and focus signal toward them.

The 2.5G port and PoE+ power

The access point has a 2.5 Gigabit Ethernet port, so the wired link is not limited to 1 Gbps. It supports 802.3at PoE+, meaning one network cable can carry both data and power from a compatible switch. A 12V/1.5A DC adapter is also listed for places without a PoE switch. Check that your switch port can deliver PoE+, and that the cabling suits a 2.5G link.

Omada management

TP-Link says the access point works with the Omada SDN platform, which brings access points, switches and gateways under one interface. Control options listed are a hardware controller, a software controller or cloud-based control, and standalone mode is also supported. The brand describes cloud management as having no additional fees, set up through the Omada app by scanning the serial number code on the package. Mesh and seamless roaming are listed, with TP-Link noting that Omada Mesh seamless roaming needs Omada SDN controllers.

Design and installation

The unit is ultra-slim, about 8.7 x 8.7 x 1.3 inches (22 x 22 x 3.3 cm) and 1.5 lb (about 0.7 kg), intended to sit flat on a ceiling. Ceiling placement usually gives more even coverage than a device in a corner.

Who it suits

It suits small and medium sites that want managed Wi-Fi with central control, and people already using, or planning, an Omada network. It is more than a simple home router replacement needs.

What to check before you buy

• Switch power: confirm a PoE+ (802.3at) switch or injector, or plan to use the DC adapter.
• Controller choice: decide between cloud, hardware controller, software controller or standalone mode.
• Cabling: check that existing cable runs suit a 2.5G connection.
• Mounting: confirm the ceiling or wall surface and the position you want.
• Coverage: one access point may not cover a large or multi-storey space.
• Support and warranty: TP-Link lists a five-year warranty; read its terms and support hours.

The short version

• A ceiling-mount Wi-Fi 6 access point rated at AX5400, model EAP670 V2.
• 2.5GbE port with 802.3at PoE+ or 12V DC power.
• Works with the Omada SDN platform, including cloud management and standalone mode.
• Mesh, band steering, load balancing, airtime fairness and beamforming are listed.
• Five-year warranty as listed.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.