TP-Link EAP613 Omada AX1800 Wi-Fi 6 Access Point: specs and who it suits

The TP-Link EAP613 is a ceiling-mount Wi-Fi 6 access point in the company's Omada range. Unlike a home router, an access point only provides wireless coverage and connects back to your network by cable. TP-Link positions the EAP613 for offices, hotels, classrooms and cafés, where several access points are managed together.

What AX1800 and Wi-Fi 6 mean

AX1800 is a combined speed class for two radio bands. TP-Link says the EAP613 reaches up to 1800 Mbps across its dual bands, using 1024-QAM and Long OFDM Symbol, and four spatial streams. In practice, no single device gets the full combined figure; it is the total across the bands. Wi-Fi 6 (802.11ax) is designed to handle more connected devices at once, and the MU-MIMO support lets the access point talk to several devices at the same time.

Management through Omada SDN

The EAP613 is part of TP-Link's Omada Software Defined Networking platform, which brings access points, switches and gateways under a single interface. TP-Link lists several control options: a hardware controller, a software controller or a cloud-based controller. Standalone mode is also supported, so you can run a single unit without a controller. The cloud option and the Omada app give remote, centralised control over multiple sites. For details of cloud controller access, TP-Link says to contact the company.

Some features depend on the controller. TP-Link notes that Omada Mesh and Seamless Roaming require an Omada SDN controller. Seamless roaming means devices move between access points without dropping a call or connection.

Wireless features

The listing names mesh Wi-Fi, WPA3 security, band steering, load balancing, airtime fairness and beamforming. In general terms: band steering nudges capable devices to the faster band; load balancing spreads clients across access points; airtime fairness stops slow devices from holding up fast ones; beamforming focuses the signal toward a device.

Power and installation

The unit supports 802.3at PoE+, 48V/0.5A passive PoE (TP-Link suggests its TL-PoE4824G injector) and 12V/1A DC power. PoE means power arrives through the Ethernet cable, so a ceiling unit needs only one cable run. Note that the DC power adapter is not included. If you do not have a PoE switch, you will need either an injector or a separate 12V supply.

The design is described as ultra-slim, at about 6.3 x 6.3 x 1.3 inches and 0.9 lb.

Warranty and support

TP-Link lists a five-year warranty and technical support from 6am to 6pm Pacific time, Monday to Friday.

Who it suits

It suits small businesses, schools, cafés and larger homes that want ceiling-mounted coverage from wired points. It also suits anyone who wants to grow into a managed network over time.

What to check before you buy

• Power source: confirm you have a PoE+ switch, a suitable injector or a 12V supply, as the adapter is not in the box.
• Controller choice: decide whether to use standalone mode or a hardware, software or cloud controller.
• Features you need: mesh and seamless roaming need an Omada controller.
• Cabling: the access point needs an Ethernet connection back to your router or switch.
• Coverage: the number of units depends on building layout and materials; check manufacturer guidance.
• Mounting: check what mounting hardware is included.

The short version

• A ceiling-mount Wi-Fi 6 access point rated AX1800 by TP-Link.
• Dual band, four spatial streams, MU-MIMO and WPA3.
• Omada SDN managed, with standalone, hardware, software or cloud control.
• Powered by PoE+, passive PoE or 12V DC; the DC adapter is not included.
• Five-year warranty.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.