Home / Tech · Product overviews / Computers & Accessories / Graphics Cards · More from PNY
PNY NVIDIA Quadro K2200 4GB Graphics Card (VCQK2200-PB): specs and uses
A single-slot professional graphics card with 4GB of GDDR5, DisplayPort 1.2 and dual DVI outputs, built for 3D and multi-display workstations. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The PNY NVIDIA Quadro K2200 (VCQK2200-PB) is a professional graphics card for workstations. It pairs 4GB of GDDR5 memory with a single-slot design and several display outputs, and NVIDIA positions it for 3D applications and multi-monitor desktops. It belongs to an older Quadro generation, so it is best understood as a workstation card rather than a modern gaming one.
Memory and 3D work
NVIDIA's description highlights 4GB of GDDR5 memory with fast bandwidth for working on large, complex models. In CAD, 3D modelling and visualisation software, the amount of graphics memory limits how detailed a scene can be before the card has to swap data, so a larger buffer helps with big assemblies. The description also stresses power-efficient performance.
Quadro cards are designed around professional applications, and many such programs list certified or supported cards. If you rely on one particular program, check the software maker's supported hardware list.
Display outputs and resolutions
The card has dual DisplayPort 1.2 outputs, one DVI-I dual-link and one DVI-D dual-link. The listing says it can drive up to three displays when connected natively, and up to four displays when using DisplayPort 1.2 multi-streaming.
The stated limits are:
- DisplayPort 1.2: up to 4096 x 2160 at 60Hz and 2560 x 1600 at 120Hz.
- DVI dual-link: up to 2560 x 1600 at 60Hz and 1920 x 1200 at 120Hz.
The description also mentions resolutions up to 3840 x 2160 at 60Hz with 30-bit colour. DisplayPort multi-streaming (MST) lets one port feed several monitors, usually through a compatible hub or daisy-chained monitors, so the monitors you plan to use matter.
CUDA 6 and compute features
The card supports CUDA 6 features including Unified Memory, Dynamic Parallelism and Dedicated Shared Memory. CUDA is NVIDIA's platform for running general calculations on the graphics processor, used in some rendering, simulation and scientific software. The listing also mentions a scalable geometry architecture.
Single-slot form
NVIDIA describes the flexible single-slot form factor as compatible with space- and power-constrained chassis. The card measures about 11 inches long and weighs roughly 1.3 lb, and occupies a single expansion slot at the back of the case. That leaves neighbouring slots free for other cards, such as storage or network adapters.
Who it suits
It suits a workstation that needs a dependable multi-display setup and moderate 3D performance, for example CAD drafting, design checks or a small studio PC, and people who need a short, single-slot card for a compact case. It is not aimed at current games or heavy modern rendering.
What to check before you buy
- Slot and power: confirm a free PCI Express x16 slot and check the card's power requirements in its manual.
- Monitor connectors: the card has DisplayPort and DVI only; HDMI or VGA monitors need adapters.
- Driver support: check that current operating systems and drivers support this older generation.
- Software: consult your application's list of supported cards.
- Length: measure the space in your case for an 11-inch card.
The short version
- A single-slot professional card with 4GB of GDDR5, model VCQK2200-PB.
- Two DisplayPort 1.2 outputs plus DVI-I and DVI-D dual-link.
- Up to four displays using DisplayPort multi-streaming.
- CUDA 6 support; suited to 3D workstation and multi-monitor use.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
