NETGEAR GS752TP 52-Port PoE+ Gigabit Smart Managed Switch: specs

The NETGEAR GS752TP is a 52-port Gigabit smart managed switch with Power over Ethernet Plus on 48 of its ports. It is built for offices, schools, shops and similar sites that need to connect many wired devices and power some of them, such as wireless access points, IP cameras and phones, through the network cable itself.

How the 52 ports are divided

NETGEAR lists 48 Gigabit Ethernet ports, all of them PoE+, along with four 1G SFP ports. The Ethernet ports handle everyday wired connections at up to 1Gbps. SFP ports take small pluggable modules, either fibre or copper, and are commonly used for uplinks to another switch or for longer cable runs than copper allows. The modules are sold separately, so check what the listing includes.

PoE+ and the 380W power limit

PoE+ refers to IEEE 802.3at, which allows up to 30W per port from the switch. The GS752TP has a total of 380W of PoE power across all 48 ports. That is an important detail: 48 ports at 30W would need 1,440W, so the power is shared. In practice, most access points and cameras draw far less than 30W each, so 380W can cover many of them, but you should add up the needs of your devices and compare the total with 380W.

Smart managed control

NETGEAR describes the software as an easy-to-use interface that provides managed control for secure setup and access, plus SNMP (NMS 300) management. Smart managed switches typically offer features like VLANs, port settings and monitoring, though they have fewer options than fully managed switches. The listing also mentions optional Insight cloud management, which lets you manage compatible NETGEAR devices through an app or web portal. Check NETGEAR's documentation for the full feature list and for any account requirements.

Desktop or rack

The switch can sit on a desk or shelf, or go into a rack. NETGEAR says the mounting hardware is included in the box. At about 20.7 x 15.9 x 4.1 inches, it is a large unit that fits a standard-width rack, though you should measure the depth of your cabinet first. NETGEAR calls the operation quiet, but a 48-port PoE switch has fans, so check placement if it will be near people.

Efficiency and warranty

The design is compliant with IEEE 802.3az, the Energy-Efficient Ethernet standard, which lowers power use on idle links. NETGEAR lists a Lifetime Limited Hardware Warranty, next business day replacement, and 24/7 chat support with a NETGEAR expert, subject to the manufacturer's terms.

The listing states the unit is made for use in the US and Canada only.

Who it suits

It suits small and medium sites that need dozens of wired and PoE-powered devices in one place, with a managed interface for tidier networks.

What to check before you buy

• Power needs: total up the draw of every PoE device and compare it with 380W.
• Device standards: confirm your devices use IEEE 802.3af or 802.3at PoE rather than passive PoE.
• SFP modules: check whether you need modules or cables for the SFP ports, and which type.
• Rack depth and weight: measure your rack, or ensure a stable surface if it is used on a desk.
• Noise: consider where the switch will sit, as fans may be audible.
• Region and mains supply: it is listed for use in the US and Canada.
• Management: read the manual about the interface and the optional cloud tools.

The short version

• A 52-port smart managed Gigabit switch: 48 PoE+ ports and 4 SFP ports.
• 380W total PoE power shared across the PoE+ ports.
• Smart managed software with SNMP and optional Insight cloud management.
• Desktop or rackmount, with mounting hardware included.
• Lifetime limited hardware warranty; listed for use in the US and Canada only.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.