NETGEAR GS724TPP 26-Port PoE+ Smart Switch: specs and who it suits

The NETGEAR GS724TPP is a managed network switch with 24 Gigabit Ethernet ports that can also power connected devices, plus two SFP ports for fibre or other uplinks. It is designed for small and mid-sized networks with wireless access points, IP cameras and similar equipment. Here is what the specs mean and who it fits.

What PoE+ and 380W mean

Power over Ethernet (PoE) sends electricity along the same cable that carries data, so a camera or access point needs only one cable and no nearby outlet. PoE+ is the 802.3at standard, which supplies up to about 30W per port. All 24 copper ports on the GS724TPP are PoE+, and NETGEAR lists a total PoE power of 380W. That total is shared across all ports, so if every port draws the 30W maximum, demand would exceed it. Most devices use less than the maximum, but it is worth adding up the needs of what you plan to connect.

24 Gigabit ports and two SFP ports

Each of the 24 ports runs at Gigabit speed (1000 Mbps). The two 1G SFP ports accept small pluggable modules, typically used for fibre links to another switch or building, or a copper module. The modules are not described in the listing as included, so check what you need.

Smart managed software

The listing describes a "smart" managed interface with controls for secure setup and access, plus SNMP (NMS 300) management. A managed switch lets you configure features like VLANs, which separate traffic on a shared network, and monitor ports, unlike a simple unmanaged switch. NETGEAR says the switch includes Insight, its tool for managing networks remotely from anywhere. The listing calls it optional, so check what it needs in terms of account and setup.

Desktop or rack

The switch can sit on a desk or mount in a rack, and the listing says the mounting hardware is in the box. It measures 20.7 x 13.8 x 4.1 inches as listed and weighs 1.3 lb. The weight and size figures look inconsistent for a 24-port unit, so check the dimensions with the manufacturer's product sheet before planning space. The listing describes quiet operation, and notes it complies with IEEE 802.3az energy-efficient Ethernet, which lowers power use on idle links.

Support and region

NETGEAR lists a limited lifetime hardware warranty, next-business-day replacement and 24/7 chat support. The listing says the unit is made for use in the U.S. and Canada only.

Who it suits

It suits small businesses, schools and larger homes that want to power several access points or IP cameras from one managed switch, and want remote management. A home with only a few devices may not need 24 ports.

What to check before you buy

• Total PoE needs: add up the wattage of your devices and compare it with 380W.
• Device standard: confirm your devices use standard PoE or PoE+.
• Uplinks: decide whether you will use the SFP ports and which modules you would need.
• Management: check how you want to use the managed features and Insight.
• Space and mounting: confirm the desk or rack space available.
• Region: the unit is made for the U.S. and Canada.

The short version

• 24 Gigabit PoE+ ports and two 1G SFP ports.
• 380W total PoE power across the ports, as NETGEAR lists.
• Smart managed software with SNMP and optional Insight cloud management.
• Desktop or rackmount, with mounting hardware included.
• Limited lifetime warranty; made for use in the U.S. and Canada.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.