NETGEAR GS108PP 8-Port Gigabit PoE+ Switch: features, specs and who it suits

The NETGEAR GS108PP is an unmanaged Gigabit Ethernet switch with eight ports, and every one of them can supply Power over Ethernet (PoE+). It lets you connect wired devices and power things like IP cameras and wireless access points through the same cable. Here is what its specs mean in practice.

Eight Gigabit ports

Gigabit Ethernet moves data at up to 1,000 Mbps per port. A switch like this expands a single network connection into eight, so computers, network storage, printers and cameras can share one wired network. Because it is unmanaged, there is no software to install and nothing to configure. NETGEAR describes setup as plug and play.

What PoE+ does

Power over Ethernet delivers electrical power along with data over a standard network cable. That means a device such as an IP camera or access point needs only one cable, with no nearby power outlet. PoE+ (IEEE 802.3at) is the version that supplies more power per port than basic PoE, up to 30W at the port in the standard.

NETGEAR gives the GS108PP a total PoE allowance of 123W across its eight PoE+ ports. The allowance is shared. If devices together need more than the total, some ports will not power up. NETGEAR says the allowance is upgradeable through a separate power module, which is sold apart.

Mounting options

The switch can sit on a desk, mount on a wall or fit in a rack, and NETGEAR says all the necessary mounting hardware is in the box. It measures about 4.0 x 1.1 x 9.3 inches in the listing and weighs about 1.3 lb (0.6 kg), so it is small enough for a shelf or a cupboard.

Quiet and efficient

NETGEAR describes the operation as silent, which suits a living space or office where noise matters. The design is energy efficient and complies with IEEE 802.3az, the standard for Energy-Efficient Ethernet, which lowers power use on idle links.

Support

NETGEAR lists a limited lifetime hardware warranty, next business day replacement and 24/7 chat with a NETGEAR expert. Check the terms for your region.

Who it suits

An unmanaged PoE+ switch fits a home office, a small business or a workshop with a handful of cameras or access points. It is less suited to networks that need VLANs or traffic control, which require a managed switch.

What to check before you buy

• Total power need: add up the wattage of every PoE device and compare it with the 123W allowance.
• PoE standard: confirm that your devices use IEEE 802.3at/af PoE rather than passive PoE.
• Region: the listing says it is made for use in the U.S. and Canada only.
• Cable run: standard Ethernet cabling has a maximum length of 100 metres.
• Number of ports: plan for growth, since all eight ports may fill quickly.
• Mounting: check where the power cord reaches and whether you need a rack or wall plate.

The short version

• An unmanaged eight-port Gigabit switch with PoE+ on every port.
• 123W total PoE allowance, with an upgrade option via a separate power module.
• No setup software, with desktop, wall or rack mounting and hardware included.
• Silent and compliant with IEEE 802.3az energy-efficiency rules.
• Limited lifetime hardware warranty, according to NETGEAR.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.