monTEK US-DS-TM1005W-LT Tilting TV Wall Mount for 50-100 Inch TVs: specs

The monTEK US-DS-TM1005W-LT is a tilting wall mount for large TVs from 50 to 100 inches. It holds the screen close to the wall and lets you angle it down a few degrees to reduce glare. Because it has no arm, it is a simple, low-profile way to hang a big television. This page explains the specs.

Strength and materials

The wall mount is made from 1.5 mm cold-rolled steel. monTEK states a maximum load of 200 lb (90 kg), although the listing title says 220 lb, so check the figure on the packaging or in the manual. The brand says the mount passed a 4x strength load test. At 7.3 lb (about 3.3 kg), it is much lighter than a full-motion arm, as it has fewer moving parts.

Tool-free tilt

A knob adjusts the tilt from +5° to -10° with no tools. A small downward tilt helps in several common situations: a TV mounted above eye level, a window reflecting on the screen, or viewing from a low sofa. Tilting mounts do not swivel or extend, so the TV stays centred on the wall.

VESA range and TV sizes

VESA is the standard spacing of the mounting holes on the back of a TV. This bracket covers patterns from 75x75 mm up to 900x600 mm. monTEK lists a long run of screen sizes, from 50 to 100 inches, flat or curved, and names major TV brands. Always match the pattern and weight to your own TV rather than the brand name.

The wall plate

The wall plate is 938 mm (about 37 inches) wide and open in design, which gives access to outlets and helps cable management. It suits 16-, 18- and 24-inch wood stud spacing, plus solid concrete or brick, for which an anchor is included. monTEK asks installers to use at least four screws, at the four corners or at symmetrical points top and bottom, and never to fix only one side.

Installation

The kit includes hardware, a bubble level and a step-by-step manual describing a 3-step installation. Follow the manual and local building codes, and have a second person help with lifting a large TV. monTEK says its support team can help with compatibility checks and installation questions.

Who it suits

It suits owners of large TVs who want a clean, flat look and only need to adjust the angle slightly. It is not the right choice if you want to swivel the screen or pull it away from the wall.

What to check before you buy

• TV details: size, weight and VESA pattern, as the brand itself asks.
• Weight limit: confirm the load figure in the manual, since the listing quotes two.
• Wall type: studs, concrete or brick; not drywall alone.
• Stud spacing: compare to the 16/18/24-inch layout and the 938 mm plate.
• Cable outlet: check where your power and HDMI outlets sit relative to the plate.
• Movement needs: this model tilts only.

The short version

• A tilting wall mount for 50-100 inch TVs, 1.5 mm cold-rolled steel.
• Rated by monTEK for 200 lb and 4x load tested.
• Tool-free tilt of +5° to -10°.
• VESA 75x75 to 900x600 mm; 938 mm open wall plate.
• Hardware, level and manual included.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.