monTEK HW1242BK Full Motion TV Wall Mount for 43-95 Inch TVs: specs and fit

The monTEK HW1242BK is a pre-assembled full motion wall mount for large TVs from 43 to 95 inches. It uses six steel arms and extends 22 inches from the wall, then retracts to 2.5 inches. This page explains the specs and what to confirm about your TV and wall.

Six arms and the load limit

monTEK says six reinforced steel arms, 38% thicker than before, give the mount more rigidity. It lists support for TVs up to 150 lb (about 68 kg) and says the mount passed 4x rated-load testing. Weight limits assume correct installation into suitable wall structure, so check your TV's weight, including any accessories, against the figure.

Moving the screen

"Full motion" means the TV can be pulled out, turned and tilted. This mount extends 22 inches (about 56 cm), swivels 60° left or right, and tilts 5° up or 10° down to reduce glare. A 3° levelling adjustment fine-tunes alignment once the TV is hung. These ranges help with off-centre seating or a screen that must be pulled forward for closer viewing.

A lower profile when folded

When retracted, the mount sits 2.5 inches (about 6.4 cm) from the wall. That gives a neater look than a bulky bracket. Integrated cable management organizes cords so the area around the TV looks tidier.

TV size and VESA

The mount supports most flat or curved OLED, QLED and LED TVs from 43 to 95 inches with VESA patterns from 200x200 to 800x400 mm. VESA is the standard spacing of screw holes on the back of a TV. Look up your TV's pattern in its manual; a size in inches alone doesn't confirm fit.

Wall requirements

The listing says it fits 16 or 18 inch wood studs, concrete or brick, and is not for drywall alone. A stud finder and suitable fasteners are essential. Follow the manual, and consider a professional if you're unsure of your wall.

Pre-assembled for faster setup

The mount arrives pre-assembled to reduce parts and steps. Labelled hardware, a mounting template, a bubble level and clear instructions are included. Even so, a large TV is awkward to lift, so a second person is a sensible precaution.

Who it suits

It suits large living rooms and family rooms where seating isn't directly in front of the TV, and anyone wanting a sturdy articulating arm. A simpler fixed mount can be enough if the screen never needs to move.

What to check before you buy

• TV size and weight: 43-95 inches, up to 150 lb.
• VESA pattern: 200x200 to 800x400 mm.
• Wall construction: 16 or 18 inch studs, concrete or brick; not drywall alone.
• Clearance: make sure the 22 inch arm and swivel have space.
• Ports and cables: keep HDMI and power connections reachable.
• In the box: hardware, template and bubble level are listed.

The short version

• A pre-assembled six-arm full motion mount for 43-95 inch TVs up to 150 lb.
• 22 inches of extension, 60° swivel left or right, +5°/-10° tilt, 3° levelling.
• Retracts to 2.5 inches; includes cable management.
• VESA 200x200 to 800x400 mm.
• Needs studs, concrete or brick; follow the manual.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.