ASUS ROG Ryuo III 360 ARGB White Edition AIO Cooler: specs and fit

The ASUS ROG Ryuo III 360 ARGB White Edition is an all-in-one (AIO) liquid cooler for desktop CPUs. It pairs a 360mm radiator with an Asetek 8th-generation pump block, three ROG ARGB fans and a small LED display on the pump head. It is aimed at gaming PC builders who want strong cooling and a clean white look inside the case.

How an all-in-one liquid cooler works

An AIO is a sealed loop. A cold plate on the pump block sits on the processor and picks up heat, liquid carries it through tubes to the radiator, and fans push air through the radiator to release it. Compared with a typical air cooler, a large radiator spreads heat across a bigger surface, which generally helps with processors that draw a lot of power. A 360mm radiator is sized for three 120mm fans, so it is one of the larger AIO formats.

The pump

ASUS says the Asetek 8th-generation pump uses a three-phase motor and delivers higher flow with lower impedance. In plain terms, the liquid circulates more easily, which supports consistent heat transfer. ASUS presents it as the basis for the cooler's performance, though the temperatures you actually see depend on the processor, the case airflow and the fan settings.

The Anime Matrix display

The most distinctive feature is the Anime Matrix, a mini LED array on the pump head. ASUS says it can show ROG-exclusive anime content, core system stats and custom animations. System stats are the practical use: seeing processor information at a glance, without opening monitoring software. The rest is cosmetic, and customisation normally goes through ASUS software.

Fans and finish

The cooler ships with ROG AF 12S ARGB fans. ASUS says they combine strong airflow with very low noise. ARGB means each fan's lighting can be controlled and synchronised with other compatible components. The pump cap is described as aluminum with a vacuum-coated lens, finished in white to match white-themed builds.

Socket compatibility

The listing gives these supported sockets:

• AMD: AM4, AM5 and TR4
• Intel: LGA 1700, 1200, 115x, 1366, 2011, 2011-3 and 2066

That is a wide range, covering both current and older platforms. Support for a socket is not the same as a guaranteed fit in every case, so check your own processor and motherboard against ASUS's compatibility information. The cooler weighs about 2.2 lb (1 kg).

Who it suits

It suits builders with a case that has a 360mm radiator mount (usually at the top or front), and who like a white, RGB-lit build with a display on the pump. It is also a straightforward option for processors that run warm under sustained load.

What to check before you buy

• Case support: confirm your case takes a 360mm radiator, and check the clearance around RAM and the top of the case.
• Socket: match your processor socket to the list above and look for any bracket or mounting notes in the manual.
• Connections: the pump and display usually need fan, power and USB headers on the motherboard; check that you have them free.
• Software: the display and lighting are normally controlled through ASUS software, so check it runs on your operating system.
• Tube length and orientation: radiator position affects how air can collect in the loop, so follow the manual's guidance.

The short version

• A 360mm AIO liquid CPU cooler in white, with an Asetek 8th-generation pump.
• Three ROG AF 12S ARGB fans.
• Anime Matrix LED display for system stats and custom animations.
• Supports AMD AM4, AM5 and TR4, and several Intel sockets including LGA 1700.
• About 2.2 lb; needs a case with 360mm radiator support.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.