ASUS Prime GeForce RTX 5070 12GB White OC: features, specs and fit

The ASUS Prime GeForce RTX 5070 White OC Edition (model PRIME-RTX5070-O12G-WHITE) is a graphics card with 12GB of GDDR7 memory, a white finish and a 2.5-slot cooler. ASUS markets it as "SFF-Ready", meaning it's meant to fit in small-form-factor PC builds as well as regular towers. Here is what the features mean.

Blackwell, DLSS 4 and AI performance

The card is built on NVIDIA's Blackwell architecture and supports DLSS 4. DLSS is NVIDIA's upscaling and frame-generation technology, which uses AI to render games at a lower internal resolution and reconstruct a sharper image, or to add generated frames, so games can run more smoothly. ASUS rates the card at 1005 AI TOPS. TOPS (trillions of operations per second) is a measure of AI processing throughput, relevant to DLSS and to AI software that uses the graphics card.

Clock speeds and memory

ASUS lists a boost clock of 2587 MHz in OC mode and 2557 MHz in default mode. Boost clocks are maximums the card can reach when temperature and power allow, rather than constant speeds. The card has 12GB of GDDR7, the newer memory type with higher bandwidth than GDDR6. Video memory holds textures and frame data, so more of it generally helps at higher resolutions.

The card uses PCIe 5.0, with HDMI and DisplayPort 2.1 outputs.

The 2.5-slot, small-form-factor design

Many high-end cards occupy three or more slots. This one takes 2.5 slots, so ASUS says it offers greater build compatibility while maintaining cooling performance. The listing gives the dimensions as 12.0 in long by 5.0 in wide (about 30 by 13 cm) and 2.3 lb (about 1 kg). Always compare against the card-length and slot limits in your case's specifications.

Cooling and quiet running

Three Axial-tech fans use a smaller hub for longer blades, and a barrier ring that ASUS says increases downward air pressure. The fans use dual ball bearings, which ASUS says can last up to twice as long as standard sleeve bearings. A phase-change thermal pad is used between the GPU and heatsink; ASUS says it helps heat transfer and lowers GPU temperatures.

With 0dB technology, the fans typically stop at low loads, so light gaming or desktop use can be close to silent. A Dual BIOS switch lets you toggle between a Quiet profile and a Performance profile. Tuning and monitoring are handled in the GPU Tweak III software, and ASUS says its Auto-Extreme manufacturing process aims at precision and reliability.

Who it suits

It suits builders who want a current-generation card with a white look, especially in a compact case where a three-slot card would not fit. It also suits those who like the option of near-silent operation at light loads.

What to check before you buy

• Case fit: check the case's maximum card length and slot clearance, even though the card is described as SFF-Ready.
• Power supply: look up the recommended supply wattage and the power connector the card needs.
• Motherboard slot: PCIe 5.0 cards generally work in older PCIe slots, though check your board.
• Display connections: make sure your monitor has inputs matching the card's outputs.
• Software: confirm driver and GPU Tweak III availability and the warranty terms on the maker's website.

The short version

• 12GB GDDR7 card on NVIDIA Blackwell with DLSS 4 and 1005 AI TOPS.
• Boost clock of 2587 MHz in OC mode, 2557 MHz by default.
• 2.5-slot, SFF-Ready design in white, about 12 in (30 cm) long.
• Three Axial-tech fans with dual ball bearings and 0dB technology.
• Dual BIOS switch for Quiet and Performance profiles.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.