VEVOR VDH-44 4 ft x 4 ft Drag Harrow: features, specs and who it suits

The VEVOR VDH-44 is a 4 ft x 4 ft drag harrow that you pull behind an ATV, UTV or small tractor. It is a tow-behind tool for smoothing and loosening ground: breaking up clumps before seeding, levelling a lawn or pasture, and dressing a gravel driveway. This page explains what its specs mean and what to check first.

What a drag harrow does

A drag harrow is a flat mat of steel with downward-pointing teeth, called tines. As the vehicle pulls it, the tines rake the surface, break up clods, spread loose material and pull out light debris. Because the mat is made of linked sections, it follows the shape of the ground rather than skipping over it. Gardeners and landowners use harrows to prepare a seedbed, cover grass seed lightly, spread manure and even out ruts in a driveway.

Tines and coverage

VEVOR gives the harrow 69 tines, each 5.9 inches (15 cm) long. The listing says they break up clumps and loosen hard soil to leave a smooth, refined surface. The overall frame is 4 ft x 4 ft (roughly 1.2 m square), so a single pass covers about 4 feet. A wider tool covers a field in fewer passes, while a narrower one is easier to manoeuvre around beds, trees and gates. Four feet is a common width for ATV-sized equipment.

Steel and finish

The harrow is made from Q235 steel, a common structural carbon steel grade. VEVOR says it resists bending and deformation, and that a rust-resistant coating helps it last outdoors. The listing gives the weight as 55.1 lb (about 25 kg), with another figure of 58.29 lb in the feature text. The weight matters because a heavier harrow presses the tines deeper into the ground, while a lighter one rides higher.

Hitching up

The harrow connects by a hitch ring, and the listing says it works with a 2-inch trailer ball. That suits vehicles with a standard ball hitch. Check what your ATV or tractor has before you buy, since a pin hitch or a different ball size will need an adapter or a different connection.

Folding and storage

The listing says the harrow folds down for compact storage, and that assembly is straightforward. Its folded shape depends on the design, but the listed dimensions of about 44.9 x 44.9 x 4.3 inches show how flat it is. It can lean against a wall or hang in a shed.

Typical uses

The listing mentions driveway grading, land tilling and yard maintenance, along with soil preparation, seeding and smoothing landscapes. Common jobs include:

• Raking out ruts and potholes in a gravel drive.
• Working through the surface of a field or food plot before seeding.
• Spreading and levelling topsoil or compost.
• Scratching a lawn to pull out thatch.

What to check before you buy

• Towing vehicle: confirm that your ATV, UTV or tractor can pull around 25 kg plus the drag of the soil, and that it has a 2-inch ball.
• Ground: harrows work best on loose or moderately firm soil. Stony ground or deep, hard clay may need a more aggressive tool.
• Width: measure gates, paths and driveways against the 4 ft width.
• Safety: keep people and pets clear of the tines, and don't use it on steep slopes where the load could shift.
• Upkeep: rinse off soil and dry the steel after use to protect the coating. Check the tines for bending.
• Assembly: read the instructions and check all fasteners before the first use.

The short version

• A 4 ft x 4 ft chain drag harrow, model VDH-44, with 69 tines of 5.9 inches each.
• Q235 steel with a rust-resistant coating; about 55 lb.
• Hitch ring suited to a 2-inch trailer ball.
• Folds for storage; suits ATVs, UTVs and tractors.
• Used for seedbed prep, levelling and driveway upkeep.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.