Home / Outdoor & Garden · Product overviews / More Outdoor & Garden · More from VEVOR
VEVOR TY-B25 Universal Tractor Suspension Seat: features and fit
A universal suspension seat with a micro switch, tilting backrest and 5.91 in rail adjustment, for tractors, mowers and similar machines. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR TY-B25 is a universal suspension seat for tractors and similar ride-on machinery. It is meant to replace a worn or missing seat, adding adjustable positions, spring suspension and a micro switch. VEVOR also lists it for lawn care and garden work, and names Ford and New Holland tractor models it fits.
What "universal" means here
A universal seat is built to bolt onto many machines, not just one. In practice that usually means checking that its mounting holes and base line up with your machine, and sometimes drilling or adding brackets. VEVOR states compatibility with Ford / New Holland 2N, 8N, 9N, NAA and Jubilee tractors, and the listing's title also mentions John Deere and Massey Ferguson. Compare the base size against your existing seat before ordering.
Suspension and weight range
The seat has suspension and shock absorption with a 60 mm (2.36 in) compression range. VEVOR says it supports operator weights from 50 to 130 kg (110 to 286.7 lb). Seat suspension typically softens bumps on rough ground and reduces the jolts passed to the operator, and a spring set for a given weight range works as intended inside that range.
Adjustments
The backrest has 3 adjustable settings, and the seat rail allows 5.91 inches (about 15 cm) of forward and back movement. VEVOR also lists a tilt feature. Together these let operators of different heights find a comfortable reach to the pedals and controls.
The micro switch
The seat contains a gravity-sensing micro switch. Many ride-on machines use a seat switch as an operator-presence control, so the engine or blades can cut out when no one is seated. VEVOR describes it as protection for the operator. Whether it works with your machine depends on how your machine is wired, so check the wiring and the manual, and do not bypass any safety control.
Materials and weather resistance
The seat uses synthetic leather over high-resilience polyurethane foam, with steel plates beneath. VEVOR says the surface has a waffle pattern and is vacuum formed and heat-sealed to be waterproof, so rain does not collect on it. It measures 24.0 x 20.1 x 20.1 inches and weighs 30.9 lb.
Who it suits
It suits owners of older tractors, garden tractors and ride-on mowers who want a more comfortable seat, and people restoring a machine whose original seat has deteriorated. The weight range matters, so heavier or lighter operators should check it carefully.
What to check before you buy
- Mounting pattern: measure the bolt holes and base of your current seat.
- Machine type: a listing that mentions a tractor model does not guarantee a fit on your exact machine.
- Switch wiring: check how the micro switch connects to your machine's circuit and whether the connector matches.
- Operator weight: confirm that it falls in the 50 to 130 kg range.
- Height clearance: allow for the extra height of a suspension seat under roll bars, canopies or low ceilings.
- Hardware: check what fasteners are included.
The short version
- A universal tractor suspension seat, model TY-B25, with a gravity-sensing micro switch.
- 60 mm suspension travel for operators from 50 to 130 kg.
- 3 backrest settings and 5.91 in of rail adjustment, plus tilt.
- Synthetic leather, polyurethane foam and a steel plate; waterproof design per VEVOR.
- Fit varies by machine, so compare mounting holes first.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
