VEVOR SSGQK-04 Wall-Mounted Cat Shelves, Set of 7: what's in the kit

The VEVOR SSGQK-04 is a set of seven wall-mounted pieces that turn a section of wall into a climbing and resting area for a cat. Because the pieces go on the wall, they use vertical space rather than floor space, and you can arrange them in a pattern that suits the room.

What is in the set

VEVOR says the set includes two jumping boards, two cat nests, two hammocks and one cat tree. Between them, they cover climbing, jumping, resting and scratching. Cats generally like to be up high, and a route of shelves gives them a path to move along and spots to settle in.

Materials and weight limit

The pieces are made of E0-grade pine wood. E0 is a formaldehyde-emission class for wood-based boards, and VEVOR describes the wood as natural and odourless. Each platform surface is covered with a plush pad for grip and softness, which VEVOR says protects the cat's paws.

The set is rated to support up to 40 lb (18.14 kg). That should be read as the manufacturer's stated limit, and whether it applies per shelf or for the set is something to confirm in the instructions. Cats vary a lot in size, and two cats may use a shelf together, so compare your cats' combined weight with that limit.

Mounting hardware

The kit contains metal screws, expansion tubes, butterfly anchors, a screwdriver, a T-shaped hex screwdriver and an installation diagram. VEVOR says one person can install it by following the guide: insert the expansion tubes into the wall and secure the boards with screws. Expansion tubes and butterfly anchors are meant for different wall types, such as solid masonry or hollow plasterboard, so choose the right fastener for your wall.

A secure fixing matters most here, as the shelves carry a moving animal. The usual advice is to locate studs or solid wall, follow the manual, and use a level while marking the holes.

Layout and space

The listing says the pieces can be arranged freely. A common approach is to stagger the shelves at heights your cat can comfortably jump between, with the nests and hammocks at the top or the end of the route. Leave clear wall space above and around each piece, and avoid placing them over furniture that could be damaged by jumping.

The listing gives the package dimensions as 17.7 x 11.8 x 12.8 inches. Once on the wall, the footprint depends on your layout. VEVOR describes the design as minimalist and suitable for a living room, bedroom or patio wall. For an outdoor wall, check that the manual approves it, since pine wood and plush pads aren't generally meant to be left in the weather.

Who it suits

It suits cat owners who want to give an active or curious cat more vertical space without a large floor-standing tree, in a home where drilling into the wall is acceptable. It is less suitable for renters who can't make holes, or for very large cats.

What to check before you buy

• Wall type: confirm that the supplied anchors suit your wall, and use studs or solid wall where possible.
• Weight: compare the 40 lb (18.14 kg) limit with your cats, and check whether it is per piece.
• Cat's ability: older cats or kittens may need smaller gaps between shelves.
• Placement: think about the heights and landing spaces.
• Cleaning: check how to wash or replace the plush pads.
• Tools: a drill and a level are typically needed even though a screwdriver is included.

The short version

• A seven-piece wall-mounted cat set: two jumping boards, two nests, two hammocks and one cat tree.
• E0-grade pine wood with plush pads, rated by VEVOR to 40 lb (18.14 kg).
• Includes screws, expansion tubes, butterfly anchors, two screwdrivers and an installation diagram.
• Arrangement is flexible and uses wall space instead of floor space.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.