Home / Home & Kitchen · Product overviews / Cats · More from VEVOR
VEVOR CAT793 63-Inch Cat Tree: layout, specs and who it suits
A 63-inch, seven-level cat tree with two condos, a hammock, a top perch and sisal posts, rated to 88 lb. What the dimensions mean and what to check before buying.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR CAT793 is a 63-inch (160 cm) multi-level cat tree for indoor cats. It combines two enclosed condos, a hammock, a top perch, sisal-wrapped scratching posts and hanging toys in one dark grey tower. It gives cats somewhere to climb, scratch and rest, and it takes up a small floor footprint for its height.
How the levels are laid out
The listing counts seven layers. Platforms sit at different heights, so a cat can choose between a low resting spot and a high lookout. The structure includes:
- a top perch of 13.3 x 13.3 x 3.1 inches (34 x 34 x 8 cm);
- two condos, each 11.8 x 11.8 x 9.8 inches (30 x 30 x 25 cm);
- a hammock of 18.5 x 15.4 inches (47 x 39 cm);
- a base of 19.7 x 15.7 inches (50 x 40 cm).
Condo size is worth a look. An enclosed space of about 30 cm square suits small to medium cats, and VEVOR describes the tree as made for one to four small to medium cats. A large breed may find the condos snug.
Scratching posts and play
Sisal rope is a long-standing choice for scratching posts because its coarse texture holds up to claws. VEVOR says the posts are thickened sisal, and the tree includes a hanging ball and spring balls for play. Giving a cat an approved place to scratch is the usual way to steer it away from sofas and door frames, though results vary from cat to cat. The surfaces are covered in soft plush.
Stability and the anti-toppling strap
A tall tree needs a stable base. VEVOR says the tree has a wide base, thickened posts and P2-grade particle board construction, and it includes an anti-toppling strap for fixing the tree to a wall. The stated weight capacity is 88 lb (40 kg), and the product weighs about 29.7 lb (13.5 kg). If you have a heavy or very energetic cat, fixing the strap is the usual precaution for any tall cat furniture. Use fixings suited to your wall type and follow the manual.
Assembly and what's in the box
The panels are pre-drilled, and VEVOR includes written instructions. The package contains the tower, a manual, 26 M8 x 35 screws, seven M8 x 80 double-ended studs, a hex wrench, an expansion screw kit and one M8 x 25 screw. Assembly of tall cat trees usually takes a while and goes more easily with two people and a clear floor.
Where it fits
At 63 inches tall and roughly 24 x 16 inches (60 x 40 cm) across its widest part, the tree fits a corner of a living room, bedroom or enclosed balcony. VEVOR also mentions pet shops, veterinary clinics and grooming salons as possible settings.
Who it suits
It suits households with one to a few small or medium indoor cats that like to climb and perch, and anyone who wants a single piece of furniture that covers scratching, napping and play.
What to check before you buy
- Your cat's size: compare the 30 cm condo and 34 cm perch with your cat.
- Floor and wall: check where the tree will stand and whether you can fix the strap to the wall.
- Weight: the capacity is 88 lb, shared among all cats using it.
- Assembly: allow time and check the screws and studs against the packing list.
- Upkeep: plush and sisal wear over time; check how the manual suggests cleaning them.
The short version
- A seven-layer, 63-inch indoor cat tree in dark grey, model CAT793.
- Two condos, a hammock, a top perch, sisal posts and hanging toys.
- Stated capacity of 88 lb (40 kg); product weight about 29.7 lb.
- Anti-toppling strap, screws and tools included.
- Made for one to four small or medium cats.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
