Home / Home & Kitchen · Product overviews / Plumbing · More from VEVOR
VEVOR 10-Gallon 1.6kW Electric Water Heater: features, specs and fit
The VEVOR FJI-POR-40S2 is a 10-gallon (40 L) electric tank water heater with a 1600W element, knob control, LED display and IPX4 side connections. What to check.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR FJI-POR-40S2 is a compact electric water heater with a 10-gallon (40 L) tank and a 1600W heating element. A small tank like this is aimed at a single sink, a bathroom, a utility room or a small commercial space where a full-size household heater would be more than is needed. Here is what the listed specs mean and what to confirm before installing one.
How a small storage heater works
Despite the "instant" wording in the listing title, this is a storage heater: it holds 10 gallons of water and keeps it hot. VEVOR says the long immersion heating element delivers continuous hot water for 24 hours and heats up to 167°F (75°C). A 1600W element is gentle compared with larger tanks, so reheating after the water is used takes time. In general, a small tank suits short, light uses such as hand washing, dishes or a single quick rinse better than back-to-back showers.
Temperature control
A rotary knob sets the temperature from 30°C to 75°C (86°F to 167°F), and an LED display shows the heating status. Many households set stored water well below the maximum, and the knob lets you choose a figure that suits you and any local guidance.
Tank and insulation
VEVOR lists an enamel-coated, corrosion-resistant inner tank. Enamel (glass-lined) tanks are common in storage heaters because they resist rust. A 20mm HFO foam insulation layer and a metal outer shell are meant to hold heat for up to 24 hours, which typically cuts reheating cycles.
Connections and protection
The water connections are on the side, and the unit has an IPX4 code, which in general means it is protected against splashing water. That helps in a damp bathroom, but IPX4 doesn't make it suitable for being sprayed directly or submerged. VEVOR also mentions additional safety features, so read the manual for the details.
Size and weight
The heater measures 16.1 x 16.1 x 30.7 inches (about 41 x 41 x 78 cm) and weighs 37.5 lb (about 17 kg) empty, which will rise considerably once the 40 L tank is full. Plan the mounting surface or floor space with that in mind.
Who it suits
It suits a small bathroom or kitchen, a workshop sink, a cabin or a small business that needs modest amounts of hot water in one place. VEVOR also lists residential and commercial use. It is less suited to a whole home.
What to check before you buy
- Hot water demand: 10 gallons will not cover several showers in a row.
- Electrical supply: confirm the voltage, circuit and wiring that the manual requires; use a qualified electrician where needed.
- Plumbing: check the side connection sizes and whether you need a pressure relief valve or fittings.
- Space: allow for the footprint and the weight of a full tank.
- Local codes: follow local regulations and the manual for installation.
- Upkeep: check the manual on draining and servicing.
The short version
- A 10-gallon (40 L) electric storage water heater with a 1600W element.
- Adjustable from 30°C to 75°C with knob control and an LED display.
- Enamel-coated inner tank and 20mm HFO foam insulation.
- IPX4 splash protection and side connections.
- Best for point-of-use hot water, not whole-home supply.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.


