Home / Home & Kitchen · Product overviews / Janitorial & Sanitation Supplies / Robotic Vacuums · More from roborock
Roborock S8+ Robot Vacuum with Sonic Mop and Self-Empty Dock: specs explained
A robot vacuum and sonic mop with a self-empty dock, dual rubber brushes, 6000 Pa suction, a lifting mop and 3D obstacle avoidance. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The Roborock S8+ is a robot vacuum with a sonic mop and a self-empty dock. It cleans floors on a schedule, lifts its mop over carpets and empties its own dustbin into a bag in the dock. Here is what the main features mean for everyday use.
Dual rubber brushes
The S8+ uses what Roborock calls the DuoRoller Brush: two rubber rollers rather than a single bristle brush. Roborock says this improves pickup and leaves fewer hair tangles. In general, rubber rollers are easier to clear than bristle brushes, which is useful in homes with long hair. The brand says it works on hardwood, tile, carpets and rugs.
6000 Pa suction
Roborock rates the suction at 6000 Pa (HyperForce). Pascals measure suction pressure. Higher figures generally help with fine dust and debris in carpet pile, although brush design and airflow also matter.
The self-empty dock
With the RockDock Plus, the robot empties itself into a 2.5 L dust bag after cleaning. Roborock says the bag holds up to seven weeks of dirt and dust (the product title states 60 days), depending on how much you clean and how dirty your floors are. Bags need replacing when full.
VibraRise sonic mopping
The mopping system vibrates the mop pad up to 3,000 times per minute with 6N of constant downward pressure, according to Roborock, to loosen dried-on marks. The mop lifts automatically when the robot detects carpet, which is meant to keep carpets from getting damp. This is a mop-and-vacuum robot without an automatic mop-washing station, so the mop pad needs washing by hand.
Obstacle avoidance and mapping
The robot uses 3D structured light and infrared imaging to identify hazards on the floor in bright and dark rooms. It builds a 3D map of your home that you can annotate with furniture for more precise cleaning. As with any robot, it helps to clear loose cables and small items first.
App control
Using the Roborock app over 2.4GHz Wi-Fi, you can see mopping and vacuuming routes and carpet locations, set schedules, and adjust suction power, vibration strength and water flow. You can also set No-Go Zones and Invisible Walls to keep it out of certain areas.
Size
The listing gives dimensions of 14.0 x 18.0 x 15.0 inches (about 36 x 46 x 38 cm) for the unit with its dock. Allow space for the dock with clearance on the sides and front, and a power outlet.
Who it suits
It suits homes with a mix of hard floors and carpet, and pets or long hair, where the owner wants emptying handled automatically and mopping done in the same pass.
What to check before you buy
- Wi-Fi: the app connection uses 2.4GHz, so confirm your router supports it.
- Dock position: pick a spot with a power outlet and open floor around it.
- Floors and rugs: check how the robot handles thresholds, rug fringes and dark flooring.
- Consumables: check dust bags, filters, brushes and mop pads, and how often they need replacing.
- Mop upkeep: check how the mop pad and water tank are filled, removed and cleaned.
- Clearance: check your furniture's height against the robot's height.
The short version
- A robot vacuum and sonic mop with a self-empty dock and 2.5 L dust bag.
- DuoRoller dual rubber brushes for fewer hair tangles.
- 6000 Pa suction and VibraRise mopping up to 3,000 vibrations a minute.
- Auto-lifting mop for carpets and 3D structured-light obstacle avoidance.
- 3D map and app control with schedules, No-Go Zones and Invisible Walls.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.


