GarveeHome 18,000 BTU 19 SEER2 Mini Split Heat Pump: features and specs

The GarveeHome 18,000 BTU mini split is a ductless air conditioner and heat pump, with an indoor unit on the wall and an outdoor unit connected by a refrigerant line. It cools and heats a single zone without ductwork. Here is what its numbers mean and what installation involves.

What 18,000 BTU and 1,250 sq ft mean

BTU measures cooling or heating output per hour. GarveeHome says this 18,000 BTU unit covers up to 1,250 square feet (about 116 square metres) and suggests bedrooms, living rooms, garages, basements, RVs and commercial spaces. Capacity needed depends on insulation, ceiling height, windows and climate, so treat the area as a rough guide and check a sizing method if the space is unusual.

Inverter technology and 19 SEER2

An inverter compressor varies its speed instead of switching fully on and off. This typically gives steadier temperatures, quieter running and lower energy use. GarveeHome says the inverter design gives 30% energy savings. SEER2 is the standard seasonal efficiency measure for cooling, and a higher number means more cooling per unit of electricity. This model is listed at 19 SEER2 and runs on 230 volts.

Five modes and comfort features

The unit has auto, cool, dry, heat and fan modes. Other listed features include automatic defrosting, self-diagnosis and cleaning, iFEEL mode, a 24-hour timer, sleep mode and an energy-saving mode. The remote sets temperatures between 61°F and 88°F (about 16°C to 31°C). The air filter is washable.

Noise and airflow

GarveeHome says noise stays below 42 decibels. That is a brand figure measured under test conditions, and the sound you hear depends on the fan speed and where the unit is mounted. It also quotes a maximum airflow distance of 50 feet (about 15 m), with 4D air circulation in the room.

Operating range

The brand says the system is designed to work from 5°F to 118°F (about -15°C to 48°C). Heat pump output typically drops as outdoor temperatures fall, so look at the manual's heating performance if you live somewhere very cold.

What's in the box and installation

The package includes an indoor unit, an outdoor unit, a remote control and an installation kit. It ships in two packages that may arrive separately. The listed size is 34.8 x 27.7 x 32.6 inches (88 x 70 x 83 cm) and the weight is 26.4 lb as given. GarveeHome states that professional installation is required, which is typical for mini splits, since the work involves electrical wiring and refrigerant lines. Follow local codes and the manual.

Who it suits

It suits a room or an addition that has no ducts, such as a garage workshop, a finished basement or a sunroom, or any home that wants one room heated and cooled on its own.

What to check before you buy

• Sizing: compare 18,000 BTU with your room's real load, not only its floor area.
• Electrical: confirm you have a 230V circuit with the right breaker size, as the manual specifies.
• Installation: arrange a qualified installer and check permit rules where you live.
• Placement: pick a wall for the indoor unit and a place for the outdoor unit within the line-set length.
• Climate: check the heating performance at your coldest temperatures.
• Upkeep: plan to wash the filter regularly.

The short version

• A ductless 18,000 BTU inverter heat pump rated at 19 SEER2, 230V.
• Covers up to 1,250 sq ft, per GarveeHome; five modes.
• Noise below 42 dB; operating range 5°F to 118°F.
• Indoor and outdoor units, remote and installation kit included.
• Professional installation required; follow local codes.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.