Garvee 17000 BTU Mini Split Heat Pump: features, specs and who it suits

The Garvee 17,000 BTU mini split is a wall-mounted ductless system that cools and heats a room using a heat pump. An indoor unit goes on the wall and an outdoor unit connects through refrigerant lines, so there's no ductwork to install. It is built for spaces that need year-round temperature control, and it works with WiFi. Here is what the specs mean and what installation involves.

Cooling, heating and operating range

A heat pump moves heat between inside and outside, reversing direction between summer and winter. Garvee gives the working room temperatures as 63 to 90°F for cooling and 32 to 80°F for heating. It says inverter models keep performing in outdoor temperatures down to 5°F. Heating output generally falls as outdoor temperatures drop, so read the manual's performance data for your climate.

Inverter technology and R32

Inverter-driven compressors adjust speed to match demand instead of constantly starting and stopping. Garvee says this enhances efficiency (it notes this applies to applicable models). The system uses R32 refrigerant, which Garvee describes as having a lower environmental impact than older refrigerants. It also lists ETL and AHRI certification, and an ECO mode that automatically reduces energy use.

Coverage

The listing says the system cools up to 1,250 sq ft. As a general rule, real capacity depends on insulation, windows, ceiling height and climate, so treat the figure as a guide and confirm it against your room.

Seven modes and everyday features

The remote offers Auto, Cool, Heat, Dry, Fan, Sleep and ECO, with fan speeds from Auto through Low, Mid and High to Turbo. Other listed functions include:

• 24-hour timer
• 4D auto swing, moving the louvres up-down and left-right
• Child lock
• I FEEL mode, which measures temperature at the remote
• Health mode and Turbo for quick cooling or heating
• WiFi connectivity

Quiet running

A MUTE function lowers the indoor fan to its slowest speed for quieter operation, and sleep mode adjusts settings automatically after 10 hours. The listing doesn't quote a decibel figure, so check the manual.

Installation

Garvee states that licensed HVAC technicians must install the system, in line with its guidelines. It is pre-charged with refrigerant and supports up to 20 m (65.6 ft) between indoor and outdoor units on 17K BTU inverter models. The unit is 230V and weighs 78 lb. Follow local codes for electrical and refrigerant work and the manual's instructions. The washable air filter should be cleaned regularly.

Who it suits

It suits homeowners adding heating and cooling to a room, garage, basement or extension without ducts, and anyone replacing window units. For a home with many separate rooms, a multi-zone setup typically gives more even comfort.

What to check before you buy

• Room size and climate: compare the 1,250 sq ft figure with your space and winter lows.
• Electrical supply: confirm your panel and circuit can support a 230V unit.
• Positioning: check the indoor and outdoor locations suit the permitted line length.
• Installer: arrange a licensed technician, and check any local permit requirements.
• Model type: the listing mentions inverter models, so confirm which features your unit has.
• Noise: consider the bedroom side of the wall for the indoor unit.
• Upkeep: plan to clean the washable filter.

The short version

• A 17,000 BTU wall-mounted heat pump for cooling and heating, 230V, WiFi enabled.
• R32 refrigerant, inverter technology on applicable models, ETL and AHRI certified.
• Seven modes, 4D swing, 24-hour timer, child lock, I FEEL and MUTE functions.
• Pre-charged; up to 65.6 ft between indoor and outdoor units on 17K inverter models.
• Professional installation by a licensed HVAC technician is required.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.