Home / Home & Kitchen · Product overviews / Heating, Cooling & Air Quality / Split-System · More from Garvee
Garvee 12,000 BTU Mini Split Heat Pump (SEER2 18.5): features and who it suits
A 230V wall-mounted inverter mini split heat pump rated at 12,000 BTU for up to 750 sq ft, with SEER2 18.5, Wi-Fi, a 32 dB low setting and a pre-charged line set.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The Garvee 12,000 BTU mini split is a ductless, wall-mounted inverter heat pump that provides both cooling and heating. It is designed for bedrooms, living rooms and small offices that don't have ducts. Here is what the specs mean.
Cooling and heating in one system
A heat pump moves heat between indoors and outdoors, so one unit can cool in warm weather and heat in cool weather. Garvee says this system covers spaces up to 750 sq ft (about 70 m²). Actual needs depend on insulation, windows, sun exposure and climate, so a sizing check is sensible.
What SEER2 18.5 means
SEER2 is a seasonal efficiency measure used in North America: the higher the number, the more cooling the system delivers for each unit of electricity over a typical season. Garvee lists 18.5 and says the inverter design can give up to 30% energy savings. That figure is the brand's claim, and the comparison it uses isn't spelled out in the listing.
Inverter systems adjust compressor speed instead of cycling fully on and off, which usually means steadier temperatures and less noise.
Noise
Garvee says operation can be as low as 32 dB. That is typically in the range of a quiet room, and is presumably measured on the indoor unit at its lowest setting; louder settings will be above it.
Controls and features
The listing mentions a 24-hour timer, sleep mode, rapid cooling and auto-restart, which brings the unit back after a power interruption. Control is through a remote or Wi-Fi. Garvee also lists R32 refrigerant, an anti-corrosion coating and a self-diagnosis system, and a 5-year compressor warranty.
Installation
The kit includes a pre-charged line set, drain hose, remote and a step-by-step guide. Garvee calls it DIY-friendly but recommends professional HVAC installation for best performance and safety. Refrigerant work and 230V wiring are regulated in many places, so follow local codes and the manual.
Size
Garvee lists dimensions of 30.7 x 13 x 23.7 inches. The listed weight is 15 lb, which likely refers to a single part of the system; check the manual for each component's size.
Who it suits
It suits homeowners adding heating and cooling to a room without ducts, such as an addition, garage workspace or small office.
What to check before you buy
- Electrical supply: confirm a 230V circuit and breaker, via a qualified electrician.
- Installation plan: decide on DIY or a licensed technician, and check local rules.
- Placement: pick a wall for the indoor unit and a spot for the outdoor unit.
- Climate: read the manual's operating range for cold weather.
- Room size: compare with 750 sq ft.
- Wi-Fi: check network and app requirements.
- Warranty terms: read the 5-year compressor coverage conditions.
The short version
- A wall-mounted inverter mini split heat pump rated at 12,000 BTU for up to 750 sq ft.
- SEER2 18.5, with Garvee citing up to 30% energy savings.
- As low as 32 dB; Wi-Fi, remote, 24-hour timer and auto-restart.
- R32 refrigerant and a 5-year compressor warranty.
- Pre-charged line set included; professional installation recommended.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
